Cable yarding technology remains the most effective operation in steep terrain harvesting systems; however, it has limitations and challenges. Using cable yarders (tractor-, truck-, and excavator-based) to extract tree lengths and whole trees has been common since the late 20th century in South Korea, and cable yarding operations were developed in the late 1800s in the United States and Europe. Machine potential and limitations must be understood to ensure the widespread use of technology, strong cooperation, and optimal selection of machinery size. We reviewed the literature on tower yarder performances from 1990–2021 to determine the alteration of yarders and its productivity pattern and obtained 23 papers; <2 publications per year discussed the determination of cable yarding productivity. We selected independent variables (e.g., silvicultural treatment, harvesting method, and cycle log volume) for cable yarding that would likely affect productivity. Data were analyzed to compare productivities under silvicultural treatment, the harvesting method, and yarding direction and identify the interaction mechanical power (i.e., lifting capacity and machine power), yarding distance, and slope. Cable yarder productivity rates generally depended on the silvicultural treatment, harvesting method, and yarding direction, particularly in clear-cut, tree-length, and uphill yarding operation activities. The lifting capacity, machine power, and slope had no significant correlation with yarders’ productivity, particularly in thinning operations, whereas, in clear-cut productivity, it was influenced by these variables. The results contribute to improving operation activities for cable yarding systems and towards future research directions.
No abstract is provided for this article.
Typical small shovel logging system, using manual felling and extraction by small crawler excavator with grapple and crawler carriers, is the predominant logging method in the Republic of Korea, due to the associated high productivity. The trails with ground pressure and one more passes of the shovel and carriers may lead to soil compaction. However, impacts of these bunching-extraction technologies on physical and hydrological properties of soils are not well known. The main objectives of this study were to: (1) determine the bulk density, porosity, and saturated hydraulic conductivity of soils in logging operation areas with three different disturbance types (i.e., undisturbed areas [UAs], bladed trails [BTs], and skid trails [STs]), and (2) compare soil compaction between these disturbance types. The most intense compaction occurred within BTs and STs, with increased bulk density and reduced porosity and hydraulic conductivity. Soil bulk density increased by 27–53% at all depths in BTs and STs compared to UAs, while porosity decreased by 23–49%. On average, saturated hydraulic conductivity at depths of 0–20 cm decreased from 337.5 mm h−1 to 30.5 mm h−1 in the most compacted sections of BTs and STs. Skid trails, which are characterized by trail construction and frequent vehicle movement, also caused greater impacts on soil compaction than BTs. This study provides useful insights to aid forest consultants and field managers in planning more environmentally sound mechanized logging operations.
No abstract is provided for this article.
The forestry industry poses a higher risk of occupational accidents than other sectors, and understanding the occurrence and characteristics of injuries and fatalities is crucial for improving the safety and health of workers and establishing future strategies. In South Korea, although occupational injuries have declined since 2010, the number of occupational accidents in forestry remains higher than that in other sectors. Occupational injuries and fatalities present considerable challenges, and thus, our objective was to analyze and compare forestry accidents between 2010 and 2020. The results indicate that the highest average number of injuries occurred among workers older than 51 years and those with less than 6 months of experience. Timber harvesting and silviculture are among the most dangerous operations in forestry. Based on the analyzed dataset, amputation and laceration injuries, as well as slip and trip injuries, were the most common, accounting for 29.2% and 22.3% of total annual occupational accidents, respectively. These results may be explained by the labor-intensive, steep terrain operations in forestry. Our findings represent an essential resource for improving worker safety and health.
Salvage logging of nematode-infested pinewoods could increase in South Korea, because of the risk of pest spread in response to climate change. No previous studies have precisely determined how to extrapolate information regarding cable extraction productivity and cost in salvage logging operations to steep terrains in South Korea. Therefore, in this study, the performance of a semi-mechanized system was observed at two different harvesting sites located in areas affected by the pinewood nematode (Bursaphelenchus xylophilus). The following were the specific aims of this study: (1) to evaluate HAM200 yarder productivity and cost in four different conditions (50 and 100 m yarding distances in uphill and downhill directions), and (2) to identify significant independent variables related to productivity. The HAM200 productivity values varied considerably and ranged from 1.95 to 2.52 m3/productive machine-hour (costs 43.29–55.81 US $/m3, respectively). Overall, productivity for trees damaged by uphill yarding was 20% higher compared to downhill yarding while productivity was not significantly different. Yarding direction, lateral distance, volume per cycle, and interaction of volume per cycle with lateral distance significantly affected the productivity. Further, our regression model, uphill yarding should be favorable from 35 to 100 m yarding distances. The findings of this study would enable better planning and decision-making regarding salvage logging, thereby allowing improved production of damaged trees.
Thinning is a silvicultural process in which trees are both harvested selectively and systematically removed from a stand to enhance forest management and ecosystem dynamics. However, this practice is challenged by the mechanical damage to residual trees, and the nature of this damage, particularly on stand damage during mechanized row-thinning and manual selective thinning, in South Korea is unknown. Therefore, objectives of this study were to compare stand damage levels and wound characteristics between three different thinning operations: manual selective, manual row-, and mechanized row-thinning. After thinning, 12%, 15%, and 10% of the residual damaged trees were observed in manual selective, manual row-, and mechanized row-thinning, respectively. Both types of row-thinning predominantly demonstrated damages at the stem and butt region, whereas in manual selective thinning, the most of the damages occurred on the roots. Manual selective thinning exhibited a slightly larger average wound size (207 cm2) compared to mechanized row- (181 cm2) and manual row-thinning (165 cm2). The wound sizes on the stem in mechanized row-thinning were significantly higher than manual selective (p < 0.05). These results may be helpful in understanding exposure to damage among different thinning types and in managing its occurrence in future practices.
No abstract is provided for this article.
This study was conducted to analyze the physical strain with heart rate monitor in timber harvesting operations in order to reduce occupational accidents. The timber harvesting activities are manual cutting(felling, limbing and bucking) with a chainsaw and extraction by cable yarder. The study took place on Japanese larch stand. The average height was 26m and average diameter at breast height(DBH) was 3 7cm. The havest unit was gentle slope to steep slope. Results showed that the heart rate increases for chocking, felling, limbing and bucking were 94.0%, 87.9%, 84.8% and 56.4% respectively. The rate of Work Load Index was higher in the limbing(61.4%) activity than other activities chocking(55.2%), felling(54.1%) and bucking(32.1%). During 50% working heart rate test it was found that limbing(1.09), chocking(1.05) and felling(1.04) was exposed to high work intensity compared to bucking(0.83). The results showed that maximum acceptable work times(felling, chocking and limbing) were 2.30 hour, 1.85 hour and 1.60 hour respectively. To avoid occupational accidents, timber harvest workers may use a suitable working hour schedule to felling, chocking, limbing.
The utilization of forest residues as a woody biomass feedstock for the production of bioenergy and bioproducts requires processing (i.e., comminution) to meet feedstock specifications, such as moisture content and particle size. The objective of this study was to determine the effect of small diameter processed hardwood (SH) and small and large diameter processed softwood (SS and LS) stems had on the productivity and cost of a track mounted sawdust machine that produced sawdust. In addition, moisture content, particle size distribution, bulk density, and the effect of knife wear were evaluated. The sawdust machine's 298-kW engine was capable of comminuting all material types except the LH stems. The machine's productivity ranged between 18.3 and 26.7 bone-dry metric ton (BDmT)/productive machine hour (PMH) at a cost of US $5.3 and US $3.6/BDmT, respectively. The moisture content of material used in the study ranged between 26 and 36%. The geometric mean particle lengths for SH, SS, and LS were 4.7, 5.3, and 4.4 mm, respectively. The machine could not process LH materials due to limited power. The bulk density of feedstock produced ranged between 234 and 281 kg/m3. Analysis indicated that knife wear did not have a significant effect on comminution productivity and feedstock quality while comminuting 60 green metric tons (GmT) of forest residues. The results from this study suggest that this sawdust machine can be useful in producing feedstock for new biomass conversion technologies that require small, uniform particles.
Simulator training offers a safe and cost-effective approach to providing new operators opportunities to become familiar with operating modern machinery. However, in Korea, the current programs are insufficient in training skilled operators capable of handling advanced forestry machinery. Consequently, these programs fall short of developing the required technical expertise, leading to difficulties in workforce employment. We compared the performance of simulator-trained participants with that of machine-trained participants by testing operators on real equipment and assessing their stress levels. Participants were categorized as those with and without excavator certificates. Within each category, participants were further divided into those receiving training via simulators or those who were trained using actual equipment. Although we detected no significant differences in the overall performance of simulator- and machine-trained participants, compared with real machine training, simulator training promoted better performance, lower levels of frustration, and a reduced mental workload due to the safer and more controlled virtual environment. These findings can be used to develop more effective training programs by incorporating simulator-based modules that enhance skill acquisition whilst reducing risks. They can also inform policy decisions to improve workforce training in industries dependent on the operation of advanced machinery, thereby ensuring that operators achieve higher levels of competence and safety.
Forests are well known to control soil erosion and severe flooding. In the Democratic People's Republic of Korea (North Korea), deforestation was estimated at 20% between 1997 and 2014. This decline was mainly reflective of improper land use practices on steep slopes. Intensive deforestation and inappropriate land management can lead to severe soil erosion. The objective of this study was to describe the regional soil erosion severity in North Korea using the Revised Universal Soil Loss Equation (RUSLE) model coupled with a GIS technique. This model is widely being used to assess the potential mean annual soil erosion under different rainfall, soil characteristics, slope, and land use conditions. The results showed that the average annual rate of soil loss was estimated to be 15.8 tonnes ha−1 yr−1. Regionally, Nampo city is the most vulnerable region to soil erosion (55.1 tonnes ha−1 yr−1), followed by Hwanghaebuk-do (30.5 tonnes ha−1 yr−1), due to rapid land development. Denuded lands, which are estimated at around 6.5% of the total area, are predicted to have contributed 192.1 million tonnes yr−1 to the country's soil erosion. Participatory agroforestry and reforestation were found to be practical solutions to reduce soil erosion, particularly on degraded landscapes, and improve people's farm-based livelihoods.
In ground-based harvesting, machine traffic can cause soil physical disturbances including excessive compaction, the displacement of the soil surface and topsoil, and rutting. These impacts can indirectly hamper seedling survival and tree growth because of reduced soil permeability and root growth. However, the extent of soil disturbance in mechanized row thinning by harvester and forwarder systems in South Korea is unclear. Therefore, our objectives were to determine the impacts of two types of harvesters, soil textures, and extraction methods on soil compaction and rutting in a Korean Pine stand. The results showed that the machine passes affected soil disturbances. The soil bulk density inside the tracks (at 0–10 and 10–20 cm soil depths) after harvester passes (wheeled vs. tracked) increased by 17 and 27% and 30 and 20%, respectively. The largest impact was recorded for the forwarding track and significant differences were observed between the track and reference locations. Furthermore, the rutting depth in the forwarding trails was significantly higher than in the harvester trails. Thus, the application of a brush mat on harvester and forwarder trails may reduce machine-induced soil compaction. These results provide useful information to help forest engineers and field managers design environmentally sound ground-based harvesting operations.
Forests in Korea are mainly located in steep mountainous areas, where small-shovel-based extraction technology is widely used, with the level of mechanization undoubtedly low due to financial limitations. On this steep terrain, a better approach may be to use cable yarders, which can offer high revenues through cable-based extraction. Therefore, improving the efficiency of cable yarding activities in good-quality timber forests is necessary. The main objectives of this study were to (1) evaluate the productivity and cost of a cable yarder operation for tree-length clearcut treatment of a Larix kaempferi (Lamb.) Carr. stand and (2) compare the productivity efficiency of two yarder (K301-4 and HAM300) types. The productivity rates of the K301-4 ranged from 10.2 to 12.5 m3/productive machine hours, with corresponding costs of US $12.6–15.4 /m3. The productivity of the HAM300 was 26% lower than that of the K301-4 for a 30% lower cycle log volume while yarding and a comparable lateral distance. This study provides insights to support production and management decisions in the forest supply chain associated with planning cable-yarding operations.
Background: Winch-assisted harvesting is an alternative to traditional cable yarding on steep slopes, offering improved operational efficiency and fewer limitations. Knowledge on the effects of winch-assisted harvesting on soil disturbance are limited. This study aimed to assess the effects of winch-assisted and conventional tracked harvester operations on soil compaction and machine slippage in a clear-cut stand with sandy loam soil. Methods: We evaluated changes in soil physical properties, in depth and extent, along machine operating corridors with and without winch-assist across slope gradients ranging from 30% to 52% and up to three machine passes. Results: The relative increase in bulk density differed between treatments. In the non-assisted corridors, the bulk density increased by 18%, 12%, and 11% at depths of 0–10, 10–20, and 20–30 cm, respectively; the winch-assisted corridors showed smaller increases of 12%, 5%, and 3% at the corresponding depths. The winch-assisted plots did not show a significant reduction in rut depth compared with the non-assisted plots, a result likely influenced by site-specific dry soil conditions. Conclusions: These results highlight the potential of winch-assisted systems to reduce horizontal soil disturbance, though their effectiveness in limiting rutting remains variable under dry conditions.
불투과형 사방댐에 의한 수질오염 문제는 산림유역관리에 있어 매우 중요하지만, 이에 대한 신뢰할 수 있는 연구는 상대적으로 부족하다. 이 연구에서는 이를 위하여 낙동강유역 사방댐을 대상으로 계류수와 저류수의 수질을 조사하였으며, 수질 특성과 유역의 물리적 환경과의 상관관계를 분석하였다. 전체 43개의 조사대상 사방댐 중에서 농업용수 등급이하로 판정된 곳은 10%미만으로 나타나 전반적으로 수질은 양호하였다. 계류수 및 저류수에서 공통적으로 상관성이 높게 나타난 항목은 TOC와 산소요구량, SS와 탁도, SS와 Chl-a, Chl-a와 탁도 등이었다. 계류수에서 높은 상관성을 보인 항목들은 BOD와 SS, BOD와 Chl-a, BOD와 탁도, TOC와 Chl-a 등이었다. 이 연구의 결론은 사방댐 저류수의 수질이 대부분 양호하였고 저류수 수질이 유출수 수질에 다소 영향이 있지만 개별 수질항목에 국한된다는 것이다. Water pollution in erosion control dams is a major issue for forest watershed management, but the effects of erosion control dams on water quality remain poorly understood. In this study, water quality data from streams and dam reservoirs were collected over the Nakdong river basin. Monitored data were further analyzed to examine the relationship between watershed characteristics and water quality. Of the total 43 erosion control dams, less than 10% had lower water quality that was not suitable for agricultural use. TOC and oxygen demand, SS and turbidity, SS and Chl-a, and Chl-a and turbidity showed high correlations (p < 0.01) both in stream water and in detained water. BOD and SS, BOD and Chl-a, BOD and turbidity, and TOC and Chl-a showed high correlations only in stream water. Overall, the results demonstrated that for most erosion control dams the water quality was relatively good. In addition, the quality of downstream water is somewhat affected by the water detained by erosion control dams, in limited ways.
