Unmanned aerial vehicles (UAVs) have attracted significant interest recently in assisting wireless communication due to their high maneuverability, flexible deployment, and low cost. This paper considers a multi-UAV enabled wireless communication system, where multiple UAV-mounted aerial base stations (BSs) are employed to serve a group of users on the ground. To achieve fair performance among users, we maximize the minimum throughput over all ground users in the downlink communication by optimizing the multiuser communication scheduling and association jointly with the UAVs' trajectory and power control. The formulated problem is a mixed integer non-convex optimization problem that is challenging to solve. As such, we propose an efficient iterative algorithm for solving it by applying the block coordinate descent and successive convex optimization techniques. Specifically, the user scheduling and association, UAV trajectory, and transmit power are alternately optimized in each iteration. In particular, for the non-convex UAV trajectory and transmit power optimization problems, two approximate convex optimization problems are solved, respectively. We further show that the proposed algorithm is guaranteed to converge to at least a locally optimal solution. To speed up the algorithm convergence and achieve good throughput, a low-complexity and systematic initialization scheme is also proposed for the UAV trajectory design based on the simple circular trajectory and the circle packing scheme. Extensive simulation results are provided to demonstrate the significant throughput gains of the proposed design as compared to other benchmark schemes.
Millimeter wave (mmWave) communication with advanced lens antenna arrays is a promising technology for achieving cost-effective 5G wireless systems. This paper studies a multi-user mmWave single-sided lens multiple-input multiple-output (MIMO) system in the uplink communication, where the base station (BS) is equipped with a full-dimensional (FD) lens antenna array with both elevation and azimuth angle resolution capabilities, and each mobile station (MS) has the conventional uniform planar array (UPA). With limited radio frequency (RF) chains at the BS and one single RF chain at each MS, we propose a low-complexity path division multiple access (PDMA) scheme to enable virtually interference-free multiuser communications, by exploiting the angle-dependent energy focusing property of the lens antenna array at the BS as well as the multi-path sparsity of mmWave channels. Besides, a new technique called path delay compensation is proposed at the BS to effectively transform the frequency-selective MIMO channel to parallel frequency-flat small-size MIMO channels, for each of which the low-complexity single-carrier (SC) transmission can be applied. Numerical results show significant sum-rate gain with the proposed design over benchmark systems.
Multi-antenna precoding effectively mitigates the interference in wireless networks. However, the precoding efficiency can be significantly degraded by the overhead due to the required feedback of channel state information (CSI). This paper addresses such an issue by proposing a systematic method of designing precoders for the two-user multiple-input-multiple-output (MIMO) interference channels based on finite-rate CSI feedback from receivers to their interferers, called cooperative feedback. Specifically, each precoder is decomposed into inner and outer precoders for nulling interference and improving the data link array gain, respectively. The inner precoders are further designed to suppress residual interference resulting from finite-rate cooperative feedback. To regulate residual interference due to precoder quantization, additional scalar cooperative feedback signals are designed to control transmitters' power using different criteria including applying interference margins, maximizing sum throughput, and minimizing outage probability. Simulation shows that such additional feedback effectively alleviates performance degradation due to quantized precoder feedback.
Six-dimensional movable antenna (6DMA) is an effective approach to improve wireless network capacity by adjusting the 3D positions and 3D rotations of distributed antenna surfaces based on the users' spatial distribution and statistical channel information. Although continuously positioning/rotating 6DMA surfaces can achieve the greatest flexibility and thus the highest capacity improvement, it is difficult to implement due to the discrete movement constraints of practical stepper motors. Thus, in this paper, we consider a 6DMA-aided base station (BS) with only a finite number of possible discrete positions and rotations for the 6DMA surfaces. We aim to maximize the average network capacity for random numbers of users at random locations by jointly optimizing the 3D positions and 3D rotations of multiple 6DMA surfaces at the BS subject to discrete movement constraints. In particular, we consider the practical cases with and without statistical channel knowledge of the users, and propose corresponding offline and online optimization algorithms, by leveraging the Monte Carlo and conditional sample mean (CSM) methods, respectively. Simulation results verify the effectiveness of our proposed offline and online algorithms for discrete position/rotation optimization of 6DMA surfaces as compared to various benchmark schemes with fixed-position antennas (FPAs) and 6DMAs with limited movability. It is shown that 6DMA-BS can significantly enhance wireless network capacity, even under discrete position/rotation constraints, by exploiting the spatial distribution characteristics of the users.
Combined with the operation experience of 500 kV and the below transmission line, this paper summarized that the external insulation disposition of transmission line is the prime cause of pollution flashover for 500 kV and the below transmission line. The suggestions about polluted insulation disposition, specific distance of creepage, number of piece in insulator string and length of string for 500 kV and 1000 kV AC transmission line are put forward.
In this communication, we introduce a high-sensitivity antenna system for Bluetooth headsets dealing with the numerous and unidentified noises in a printed circuit board (PCB). This antenna system is composed of a ground radiation antenna for Bluetooth applications and an adjacent slot for noise suppression. A loop-type circuit is used to model a noise source on the PCB to provide wide-frequency spectrum noise currents to analyze the noise performance of the high-sensitivity antenna system. Decoupling between the noise sources and the antenna port can lead to high sensitivity. An adjacent slot is designed as part of the system to improve the sensitivity, based on the decoupling theorem. This proposed system is effective and applicable for high-sensitivity antenna design, as verified through simulation and active measurements of Bluetooth headsets.
Constant envelope (CE) precoding is an appealing transmission technique which enables the use of highly efficient nonlinear radio frequency (RF) power amplifiers (PAs). For CE precoding in a single-user multiple-input single-output (MISO) channel, a desired constellation is feasible at the receiver if and only if it can be scaled to lie in an annulus, whose boundaries are characterized by the instantaneous channel realization. Therefore, if a fixed receiver constellation is used for CE precoding in fading channel, where the annulus is time-varying, there is a non-zero probability of encountering a channel that makes CE precoding infeasible. To tackle this problem, we study the fixed-rate adaptive receiver constellation design for CE precoding to minimize symbol error rate (SER) in a single-user MISO flat-fading channel with an arbitrary number of antennas at the transmitter. Specifically, this paper proposes an efficient algorithm to find the optimal two-ring amplitude-and-phase shift keying (APSK) constellation that is both feasible and of the maximum minimum Euclidean distance (MED), for any given constellation size and instantaneous channel realization. Numerical results show that by using the optimized adaptive receiver constellation, our proposed scheme achieves significantly improved SER performance than CE precoding with fixed receiver constellation. Furthermore, with the PA efficiency gain achieved by CE precoding, our proposed scheme requires less transmitter power consumption to achieve a desired SER level than linear precoding schemes under the less-stringent average per-antenna power constraint (PAPC).
We consider the problem of quantifying the Pareto optimal boundary in the achievable rate region over multiple-input single-output (MISO) interference channels, where the problem boils down to solving a sequence of convex feasibility problems after certain transformations. The feasibility problem is solved by two new distributed optimal beamforming algorithms, where the first one is to parallelize the computation based on the method of alternating projections, and the second one is to localize the computation based on the method of cyclic projections. Convergence proofs are established for both algorithms.
This paper studies the information-theoretic limits of a secondary or cognitive radio (CR) network under spectrum sharing with an existing primary radio network. In particular, the fading cognitive multiple-access channel (C-MAC) is first studied, where multiple secondary users transmit to the secondary base station (BS) under both individual transmit-power constraints and a set of interference-power constraints each applied at one of the primary receivers. This paper considers the long-term (LT) or the short-term (ST) transmit-power constraint over the fading states at each secondary transmitter, combined with the LT or ST interference-power constraint at each primary receiver. In each case, the optimal power allocation scheme is derived for the secondary users to achieve the ergodic sum capacity of the fading C-MAC, as well as the conditions for the optimality of the dynamic time-division-multiple-access (D-TDMA) scheme in the secondary network. The fading cognitive broadcast channel (C-BC) that models the downlink transmission in the secondary network is then studied under the LT/ST transmit-power constraint at the secondary BS jointly with the LT/ST interference-power constraint at each of the primary receivers. It is shown that D-TDMA is indeed optimal for achieving the ergodic sum capacity of the fading C-BC for all combinations of transmit-power and interference-power constraints.
No abstract is provided for this article.
In this paper, we mainly focus on the metrological issues of such error parameters as EVM (Error Vector Magnitude), and address technical solutions on: 1. periodical continuity of digital modulated baseband waveforms with finite length; 2. fundamental digital modulation error settings based on error symbol design. This system can be applied to calibrate VSA (vector signal analyzer), and simulations have shown that it can continuously adjust the values of digital modulation errors in a large range, and set the expected error parameters. In addition, it also shows strong consistency of the measured value and the calculated values for EVM.
With growing popularity, unmanned aerial vehicles (UAVs) are pivotally extending conventional terrestrial Internet of Things (IoT) into the sky. To enable high-performance two-way communications of UAVs with their ground pilots/users, cellular network-connected UAV has drawn significant interests recently. Among others, an important issue is whether the existing cellular network, designed mainly for terrestrial users, is also able to effectively cover the new UAV users in the three-dimensional (3-D) space for both uplink and downlink communications. Such 3-D coverage analysis is challenging due to the unique air-ground channel characteristics, the resulted interference issue with terrestrial communication, and the nonuniform 3-D antenna gain pattern of ground base station (GBS) in practice. Particularly, high-altitude UAV often possesses a high probability of line-of-sight (LoS) channels with a large number of GBSs, while their random binary (LoS/non-LoS) channel states and (on/off) activities give rise to exponentially large number of discrete UAV-GBS association/interference states, rendering coverage analysis more difficult. This paper presents a new 3-D system model to incorporate UAV users and proposes an analytical framework to characterize their uplink/downlink 3-D coverage performance. To tackle the above exponential complexity, we introduce a generalized Poisson multinomial (GPM) distribution to model the discrete interference states, and a novel lattice approximation (LA) technique to approximate the nonlattice GPM variable and obtain the interference distribution efficiently with high accuracy. The 3-D coverage analysis is validated by extensive numerical results, which also show effects of key system parameters, such as cell loading factor, GBS antenna downtilt, UAV altitude, and antenna beamwidth.
The necessity of evaluating the properties of power plant boiler tubes is explained, and the results obtained, simultaneously stressing that the job ahead is to develop new types of boiler tubes. Table 1
The operation modes of a novel prototype of ZVS for three_phase DC_AC inverter based on DSP are described.The problems in the control strategy are analyzed in detail to find out their influence on ZVS.The simulated waveforms and the experimental results are given.
Intelligent reflecting surface (IRS) that enables the control of the wireless propagation environment has been looked upon as a promising technology for boosting the spectrum and energy efficiency in future wireless communication systems. Prior works on IRS are mainly based on the ideal phase shift model assuming the full signal reflection by each of the elements regardless of its phase shift, which, however, is practically difficult to realize. In contrast, we propose in this paper a practical phase shift model that captures the phase-dependent amplitude variation in the element-wise reflection coefficient. Applying this new model to an IRS-aided wireless system, we formulate a problem to maximize its achievable rate by jointly optimizing the transmit beamforming and the IRS reflect beamforming. The formulated problem is non-convex and difficult to be optimally solved in general, for which we propose a low-complexity suboptimal solution based on the alternating optimization (AO) technique. Simulation results unveil a substantial performance gain achieved by the joint beamforming optimization based on the proposed phase shift model as compared to the conventional ideal model.
This minireview summarized several examples to illustrate the application of electrochemical methods for pharmaceutical and drug analysis. Special attentions were devoted to the voltermmetric and potentiometric techniques. A section dedicated to the application of the electrochemical detectors coupled with flow system was also presented. Finally, we briefly outline future trends of the electrochemical methods for drug analysis. Keywords: Voltammetric, Potentiometric, Coupled, Pharmaceutical, Drug, Analysis
