We consider the use of energy harvesters, in place of conventional batteries with fixed energy storage, for point-to-point wireless communications. In addition to the challenge of transmitting in a channel with time selective fading, energy harvesters provide a perpetual but unreliable energy source. In this paper, we consider the problem of energy allocation over a finite horizon, taking into account channel conditions and energy sources that are time varying, so as to maximize the throughput. Two types of side information (SI) on the channel conditions and harvested energy are assumed to be available: causal SI (of the past and present slots) or full SI (of the past, present and future slots). We obtain structural results for the optimal energy allocation, via the use of dynamic programming and convex optimization techniques. In particular, if unlimited energy can be stored in the battery with harvested energy and the full SI is available, we prove the optimality of a water-filling energy allocation solution where the so-called water levels follow a staircase function.
Block diagonalization (BD) is a practically favorable precoding technique that eliminates the interuser interference in downlink multiuser multiple-input multiple-output (MIMO) systems. In this paper, we apply BD to the downlink transmission in a cooperative multi-cell system, where the signals from different base stations (BSs) to all the mobile stations (MSs) are jointly designed with the perfect knowledge of the downlink channels and transmit messages. Specifically, this paper studies the BD precoder design to maximize the weighted sum-rate achievable for all the MSs. The associated optimization problem can be formulated in an auxiliary MIMO broadcast channel (BC) with a set of transmit power constraints equivalent to those for different BSs in the multi-cell system. Based on convex optimization techniques, this paper designs an efficient algorithm to solve this problem, and derives the structure of the corresponding optimal BD precoding matrix. Moreover, for the special case of single-antenna BSs and MSs, it is shown that the proposed solution leads to the optimal zero-forcing beamforming (ZF-BF) precoder design for the multiple-input single-output (MISO) BC with the per-antenna power constraints.
Conventional multi-beam forming with fixed-position antenna (FPA) arrays needs to trade-off between maximizing the beamforming gain over desired directions and minimizing the interference power over undesired directions. In this letter, we study the enhanced multi-beam forming with a linear movable-antenna (MA) array by exploiting the new degrees of freedom (DoFs) via antennas' position optimization. Specifically, we jointly optimize the antenna position vector (APV) and antenna weight vector (AWV) to maximize the minimum beamforming gain over multiple desired directions, subject to a given constraint on the maximum interference power over undesired directions. We propose an efficient alternating optimization algorithm to find a suboptimal solution by iteratively optimizing one of the APV and AWV with the other being fixed. Numerical results show that the proposed multi-beam forming design with MA arrays can significantly outperform that with the traditional FPA arrays and other benchmark schemes in terms of both beamforming gain and interference suppression.
This letter studies the pilot contamination (PC) problem for massive multiple-input multiple-output (MIMO) networks with coexisting terrestrial users and unmanned aerial vehicles (UAVs). Due to the strong line-of-sight (LoS) air-to-ground channels between UAVs and base stations (BSs), UAVs usually cause a more severe PC issue as compared to the traditional terrestrial users. To mitigate the PC caused by UAVs, we propose a low-complexity distributed scheme by exploiting the full-dimensional beamforming of massive MIMO BSs and the angle-dependent LoS channels between them and high-altitude UAVs. Numerical results show the effectiveness of the proposed pilot decontamination scheme and the significant signal-to-interference-plus-noise ratio (SINR) gains in both the uplink and downlink after pilot decontamination.
Wireless power transfer (WPT) is a promising new solution to provide convenient and perpetual energy supplies to wireless networks. In practice, WPT is implementable by various technologies such as inductive coupling, magnetic resonate coupling, and electromagnetic (EM) radiation, for short-/mid-/long-range applications, respectively. In this paper, we consider the EM or radio signal enabled WPT in particular. Since radio signals can carry energy as well as information at the same time, a unified study on simultaneous wireless information and power transfer (SWIPT) is pursued. Specifically, this paper studies a multiple-input multiple-output (MIMO) wireless broadcast system consisting of three nodes, where one receiver harvests energy and another receiver decodes information separately from the signals sent by a common transmitter, and all the transmitter and receivers may be equipped with multiple antennas. Two scenarios are examined, in which the information receiver and energy receiver are separated and see different MIMO channels from the transmitter, or co-located and see the identical MIMO channel from the transmitter. For the case of separated receivers, we derive the optimal transmission strategy to achieve different tradeoffs for maximal information rate versus energy transfer, which are characterized by the boundary of a so-called rate-energy (R-E) region. For the case of co-located receivers, we show an outer bound for the achievable R-E region due to the potential limitation that practical energy harvesting receivers are not yet able to decode information directly. Under this constraint, we investigate two practical designs for the co-located receiver case, namely time switching and power splitting, and characterize their achievable R-E regions in comparison to the outer bound.
The performance of cloud radio access network (C-RAN) is constrained by the limited fronthaul link capacity under future heavy data traffic. To tackle this problem, extensive efforts have been devoted to design efficient signal quantization/compression techniques in the fronthaul to maximize the network throughput. However, most of the previous results are based on information-theoretical quantization methods, which are hard to implement practically due to the high complexity. In this paper, we propose using practical uniform scalar quantization in the uplink communication of an orthogonal frequency division multiple access (OFDMA) based C-RAN system, where the mobile users are assigned with orthogonal sub-carriers for transmission. In particular, we study the joint wireless power control and fronthaul quantization design over the sub-carriers to maximize the system throughput. Efficient algorithms are proposed to solve the joint optimization problem when either information-theoretical or practical fronthaul quantization method is applied. We show that the fronthaul capacity constraints have significant impact to the optimal wireless power control policy. As a result, the joint optimization shows significant performance gain compared with optimizing only wireless power control or fronthaul quantization. Besides, we also show that the proposed simple uniform quantization scheme performs very close to the throughput performance upper bound, and in fact overlaps with the upper bound when the fronthaul capacity is sufficiently large. Overall, our results reveal practically achievable throughput performance of C-RAN for its efficient deployment in the next-generation wireless communication systems.
Integrating unmanned aerial vehicles (UAVs) into future wireless systems such as the fifth-generation cellular network is anticipated to bring significant benefits for both the UAV and telecommunication industries. Generally speaking, UAVs can be used as new aerial platforms in the cellular network to provide communication services for terrestrial users, or become new aerial users of the cellular network served by the terrestrial base stations. Due to their high altitude, UAVs usually have dominant line-ofsight channels with the ground nodes, which, however, pose new security challenges to future wireless networks with widely deployed UAVs. On one hand, UAV-ground communications are more prone than terrestrial communications to eavesdropping and jamming attacks by malicious nodes on the ground. On the other hand, compared to malicious ground nodes, malicious UAVs can launch more effective eavesdropping and jamming attacks to terrestrial communications. Motivated by the above, in this article, we aim to identify such new issues from a physical-layer security viewpoint and present novel solutions to tackle them efficiently. Numerical results are provided to validate their effectiveness, and promising directions for future research are also discussed.
In this paper, we consider a challenging secure wireless sensing scenario where a legitimate radar station (LRS) intends to detect a target at unknown location in the presence of an unauthorized radar station (URS). We aim to enhance the sensing performance of the LRS and in the meanwhile prevent the detection of the same target by the URS. Under this setup, conventional stealth-based approaches such as wrapping the target with electromagnetic wave absorbing materials are not applicable, since they will disable the target detection by not only the URS, but the LRS as well. To tackle this challenge, we propose in this paper a new target-mounted IRS approach, where intelligent reflecting surface (IRS) is mounted on the outer/echo surface of the target and by tuning the IRS reflection, the strength of its reflected radar signal in any angle of departure (AoD) can be adjusted based on the signal's angle of arrival (AoA), thereby enhancing/suppressing the signal power towards the LRS/URS, respectively. To this end, we propose a practical protocol for the target-mounted IRS to estimate the LRS/URS channel and waveform parameters based on its sensed signals and control the IRS reflection for/against the LRS/URS accordingly. Specifically, we formulate new optimization problems to design the reflecting phase shifts at IRS for maximizing the received signal power at the LRS while keeping that at the URS below a certain level, for both the cases of short-term and long-term IRS operations with different dynamic reflection capabilities. To solve these non-convex problems, we apply the penalty dual decomposition method to obtain high-quality suboptimal solutions for them efficiently. Finally, simulation results are presented that verify the effectiveness of the proposed protocol and algorithms for the target-mounted IRS to achieve secure wireless sensing, as compared with various benchmark schemes.
Radiative wireless power transfer (WPT) is a promising technology to provide cost-effective and real-time power supplies to wireless devices. Although radiative WPT shares many similar characteristics with the extensively studied wireless information transfer or communication, they also differ significantly in terms of design objectives, transmitter/receiver architectures and hardware constraints, etc. In this article, we first give an overview on the various WPT technologies, the historical development of the radiative WPT technology and the main challenges in designing contemporary radiative WPT systems. Then, we focus on discussing the new communication and signal processing techniques that can be applied to tackle these challenges. Topics discussed include energy harvester modeling, energy beamforming for WPT, channel acquisition, power region characterization in multi-user WPT, waveform design with linear and non-linear energy receiver model, safety and health issues of WPT, massive MIMO (multiple-input multiple-output) and millimeter wave (mmWave) enabled WPT, wireless charging control, and wireless power and communication systems co-design. We also point out directions that are promising for future research.
Cloud radio access network (CRAN), in which remote radio heads (RRHs) are deployed to serve users in a target area, and connected to a central processor (CP) via limited-capacity links termed the fronthaul, is a promising candidate for the next-generation wireless communication systems. Due to the content-centric nature of future wireless communications, it is desirable to cache popular contents beforehand at the RRHs, to reduce the burden on the fronthaul and achieve energy saving through cooperative transmission. This motivates our study in this paper on the energy efficient transmission in an orthogonal frequency division multiple access (OFDMA)-based CRAN with multiple RRHs and users, where the RRHs can prefetch popular contents. We consider a joint optimization of the user-SC assignment, RRH selection and transmit power allocation over all the SCs to minimize the total transmit power of the RRHs, subject to the RRHs' individual fronthaul capacity constraints and the users' minimum rate constraints, while taking into account the caching status at the RRHs. Although the problem is non-convex, we propose a Lagrange duality based solution, which can be efficiently computed with good accuracy. We compare the minimum transmit power required by the proposed algorithm with different caching strategies against the case without caching by simulations, which show the significant energy saving with caching.
The problems existed in the operation of catalytic distillation,such as the initiation and control of dimerization,the optimization of methanol content in the feed to the catalytic distillation column. The amount of isoamylenes at the column bottom and its control as well as the initiation and control of side-reaction of dimethyl ether in the catalytic distillation colomn are discussed and analyzed.
