Publications

No abstract is provided for this article.

Abstract HHV-6 was evaluated in vitro for its susceptibility to a broad range of nucleoside analogues. PFA and several acyclic nucleoside phophonates emerged as the most potent inhibitors of HHV-6 replication as monitored by a newly developed immunofluorescence / flow cytometric assay as well as by microscopical evaluation of their inhibitory effect on HHV-6-induced cytopathogenicity.

Chemokines attract and activate distinct sets of leukocytes. The CC chemokine eotaxin has been characterized as an important mediator in allergic reactions because it selectively attracts eosinophils, Th2 lymphocytes, and basophils. Human eotaxin has a penultimate proline, indicating that it might be a substrate for dipeptidyl-peptidase IV (CD26/DPP IV). In this study we demonstrate that eotaxin is efficiently cleaved by CD26/DPP IV and that the NH2-terminal truncation affects its biological activity. CD26/DPP IV-truncated eotaxin(3-74) showed reduced chemotactic activity for eosinophils and impaired binding and signaling properties through the CC chemokine receptor 3. Moreover, eotaxin(3-74) desensitized calcium signaling and inhibited chemotaxis toward intact eotaxin. In addition, HIV-2 infection of CC chemokine receptor 3-transfected cells was inhibited to a similar extent by eotaxin and eotaxin(3-74). Thus, CD26/DPP IV differently regulates the chemotactic and antiviral potencies of eotaxin by the removal of two NH2-terminal residues. This physiological processing may be an important down-regulatory mechanism, limiting eotaxin-mediated inflammatory responses.

The four antiherpes compounds acyclovir, adenine arabinoside, bromovinyldeoxyuridine, and phosphonoformic acid showed an additive to synergistic effect with human leukocyte interferon in inhibiting focus formation by three different strains of varicella-zoster virus in human embryonic fibroblasts.

Purpose The purpose of this paper is to assess a new powder metallurgy process to make alumina parts through indirect selective laser sintering (SLS). Density measurements, some geometrical assessments and scanning electron microscopy (SEM) microstructural analyses are performed after each stage of the process, allowing an objective overview to be provided of the challenges and possibilities for the processing of high density technical ceramic parts through SLS of ball milled alumina/polyamide powder agglomerates. Design/methodology/approach The powder production by ball milling, SLS, cold isostatic pressing (CIP) or quasi isostatic pressing (QIP), debinding and sintering (FS) stages of the powder metallurgy process were sequentially investigated. Findings Alumina parts with a density up to 94.1 per cent could be produced by a powder metallurgy process containing an SLS step. Microstructural investigation of the sintered samples reveals an alumina matrix with a grain size of ∼5 μm and two different kinds of pore morphologies, i.e. long elongated pores, which stem from the intergranular spacings during SLS, and intermediate pores, which likely originate from larger polyamide agglomerates in the ball milled powder. Also, QIPing at elevated temperatures is found to be a promising alternative for CIPing at room temperature to increase the final part density. Research limitations/implications Cracks, long elongated pores and intermediate pores remained in the sintered parts. Homogenizing the microstructure of the parts through optimizing the composite starting powder, the deposition during SLS, the SLS parameters and QIPing parameters is essential to overcome these limitations. Practical implications Homogenizing the starting powder mixture and the microstructure of the SLS material is the key issue for producing ceramic parts through indirect SLS. Originality/value Indirect SLS of ceramics has hardly been reported and the combined use of SLS and QIPing is innovative in the field of indirect SLS of ceramics.

This paper demonstrates how thermal treatments can be used to enable the laser sintering (LS) of polybutene-1 (PB-1). One of the major issues with the examined PB-1 grade is the limited thermal operating window. At temperatures slightly below 90 °C crystallisation is too fast, resulting in warpage during processing. Above 90 °C, however, the powder becomes increasingly sticky, limiting the maximum bed temperature that can be applied in a laser sintering station. In this work, the problem is remediated by annealing the powder at 115 °C, which creates a more perfect crystal structure with a sharper melting onset. An alternative treatment of melting, slowly cooling and aging the sample at room temperature creates a powder with a stabilised crystal structure, which has a sharp melting onset at 120 °C and thus also a broader thermal window. Test parts were created on an LS machine validating the increase in processability.

Abstract For Abstract see ChemInform Abstract in Full Text.