Publications

Here we demonstrate a magnetic resonance coupling based wireless triboelectric nanogenerator (TENG) and fully self-powered wireless sensors. By integrating a microswitch and an inductor with the TENG, the pulsed voltage output is converted into a sinusoidal voltage signal with a fixed frequency. This can be transmitted wirelessly from the transmit coil to the resonant-coupled receiver coil with an efficiency of 73% for a 5 cm distance between the two coils (10 cm diameter). Analytic models of the oscillating and coupled voltage signals for the wireless energy transfer are developed, showing excellent agreement with the experimental results. A TENG of 40 × 50 mm

Core-shell nanowires (NWs) composed of silicon (Si) and germanium (Ge) are key structures for realizing high mobility transistor channels, since the site-selective doping and band-offset in core-shell NWs separate the carrier transport region from the impurity doped region, resulting in the suppression of impurity scattering. Four different types of Si/Ge (i-Si/n-Ge, p-Si/i-Ge) and Ge/Si (n-Ge/i-Si, i-Ge/p-Si) core-shell NWs structures were rationally grown. The surface morphology significantly depended on the types of the core-shell NWs. Raman and X-ray diffraction (XRD) measurements clearly characterized the compressive and tensile stress in the core and shell regions. The observation of boron (B) and phosphorus (P) local vibrational peaks and the Fano effect clearly demonstrated that the B and P atoms are selectively doped into the shell and core regions and electrically activated in the substitutional sites, showing the success of site-selective doping.

Islet amyloid is hypothesized to play a role in nonimmunologic transplanted islet graft loss. We performed a quantitative histologic analysis of liver biopsies from intrahepatic islet grafts transplanted in streptozotocin-induced diabetic cynomolgus macaques. Seven animals treated with antithymocyte globulin (ATG) and rapamycin or ATG and rituximab experienced islet graft rejection with lymphocytic infiltrates present on islet graft biopsies. Except for one case involving the oldest and largest donor where amyloid was present on initial biopsy 1 month after transplant, none of the six other cases with rejection contained amyloid, including one case biopsied serially to 25 months. In contrast, four out of six animals treated with ATG and rituximab and rapamycin had no evidence of rejection at the time of biopsy (two animals that discontinued rapamycin had mild periislet lymphocytes), and all four cases followed more than 4 months demonstrated amyloid deposition at subsequent time points. Amyloid severity increased with time after transplant (r = 0.68; P < 0.05) and with decreasing islet β-cell area (r = −0.68; P < 0.05). In two islet recipients with no evidence of rejection and still normoglycemic and insulin independent at the first detection of amyloid, β-cell secretory capacity declined over time coincident with increasing amyloid severity and decreasing β-cell area, with both animals eventually becoming hyperglycemic and insulin dependent. Transplanted islet amyloid also developed in autologous islets placed sc. These results indicate that in cynomolgus macaques, transplanted islets may accumulate amyloid over time associated with subsequent decline in β-cell mass and function and support the development of intrahepatic islet amyloid as a potential mechanism for nonimmunologic islet graft loss.

'Photovoltaic Devices' published in 'Encyclopedia of Nanotechnology'

In this Paper we present growth and characterization of ZnO nanowires on wideband gap substrates, such as SiC and GaN. Experimental results on the ZnO nanowires grown on p-SiC and p-GaN are presented with growth morphology, structure analysis, and dimensionality control. We also present experimental results on individual nanowires such as I-V measurements and UV sensitivity measurements with use of polymer coating on ZnO nanowires. The ZnO nanowires can be used for a variety of nanoscale optical and electronics applications.

A key concept in the emerging field of spintronics is the voltage-gate control of spin precession via the effective magnetic field generated by the Rashba spin-orbit coupling (SOC). Traditional external gate voltage usually needs a power supply, which can easily bring about background noise or lead to a short circuit in measurement, especially for nanoscale spintronic devices. Here, we present a study on the circular photogalvanic effect (CPGE) in a ZnO/P3HT nanowire array structure with the device excited under oblique incidence. We demonstrate that a strong Rashba SOC is induced by the structure inversion asymmetry of the ZnO/P3HT heterointerface. We show that the Rashba SOC can be effectively tuned by inner-crystal piezo-potential created inside the ZnO nanowires instead of an externally applied voltage. The piezo-potential can not only ensure the stability of future spin-devices under a static pressure or strain but also work without the need of extra energy; hence this room-temperature generation and piezotronic effect control of spin photocurrent demonstrate a potential application in large-scale flexible spintronics in piezoelectric nanowire systems.

We examine the crystal structure and growth direction of Cu2S nanowire arrays grown from copper surfaces at room temperature. By using X-ray diffraction (XRD), transmission electron microscopy (TEM) and electron diffraction (ED) techniques, the monoclinic Cu2S nanowires are shown to grow preferentially along the c-axis, characterized by a layered structure. This result may shed light on the unusual growth mechanism of the Cu2S nanowires.

Abstract With its light weight, low cost and high efficiency even at low operation frequency, the triboelectric nanogenerator is considered a potential solution for self-powered sensor networks and large-scale renewable blue energy. As an energy harvester, its output power density and efficiency are dictated by the triboelectric charge density. Here we report a method for increasing the triboelectric charge density by coupling surface polarization from triboelectrification and hysteretic dielectric polarization from ferroelectric material in vacuum ( P ~ 10 −6 torr). Without the constraint of air breakdown, a triboelectric charge density of 1003 µC m −2 , which is close to the limit of dielectric breakdown, is attained. Our findings establish an optimization methodology for triboelectric nanogenerators and enable their more promising usage in applications ranging from powering electronic devices to harvesting large-scale blue energy.

A newly designed triboelectric nanogenerator (TENG) is demonstrated based on a contact-separation process between an Al foil and a finite size polyamide (PA) film. The working mechanism is based on charge transfer between the Al foil and ground. A 4×4 matrix of TENG array can be used for tracking motion by recording the output voltages signals in real-time to form a pressure map.