Publications

Silicon-based nanostructures with different morphologies, sizes, compositions, and microstructures were grown on Si wafers by thermal evaporation of SiO powders at 1350 °C for 5 h under 300 Torr of a flowing gas mixture of 5% H2-Ar at a flow rate of 50 standard cubic centimeters per minute (sccm). The SiO powders and Si wafers were placed inside an alumina tube, which was heated by a tube furnace. The local temperature inside the tube was carefully calibrated by a thermal couple. After evaporation, Si-containing products with different colors and appearances were formed on the surfaces of the Si wafers over a wide temperature range of 890−1320 °C and a long distance of ∼85 mm. Basing on the colors and appearances of the products, five distinct zones, which corresponding to different temperature ranges, were clearly identified from the highest temperature of 1320 °C to the lowest temperature of 890 °C. They are zone I (1250−1320 °C), zone II (1230−1250 °C), zone III (1180−1230 °C), zone IV (930−1180 °C), and zone V (890−930 °C). The deposited products were systematically studied by scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results show that, besides Si nanowires, many other kinds of Si-based nanostructures such as octopuslike, pinlike, tadpolelike, and chainlike structures were also formed. The temperature distribution inside the alumina tube was found to play a dominant role on the formation of these structures. It is demonstrated that a control over the growth temperature can precisely control the morphologies and intrinsic structures of the silicon-based nanomaterials. This is an important step toward design and control of nanostructures. The growth mechanisms of these products were briefly discussed.

Amorphization and ultrafine-scale recrystallization within shear bands formed in shock-consolidated Pr2Fe14B∕α-Fe nanocomposite magnetic powder compacts have been observed using transmission electron microscopy. The shear bands span through multiple grain lengths and truncate preexisting ∼25nm hard and soft magnetic phase grains, resulting in further grain size refinement. The shear bands contain nanocrystallites (<10nm size) interdispersed in an amorphous matrix, which suggests the occurrence of shock-induced phase transition in localized regions of the shear bands, and provides insight into the process of deformation of nanocrystalline materials under coupled high-strain-rate and high-pressure conditions.

Abstract Self-powered system that is interface-free is greatly desired for area-scalable application. Here we report a self-powered electroluminescent system that consists of a triboelectric generator (TEG) and a thin-film electroluminescent (TFEL) lamp. The TEG provides high-voltage alternating electric output, which fits in well with the needs of the TFEL lamp. Induced charges pumped onto the lamp by the TEG generate an electric field that is sufficient to excite luminescence without an electrical interface circuit. Through rational serial connection of multiple TFEL lamps, effective and area-scalable luminescence is realized. It is demonstrated that multiple types of TEGs are applicable to the self-powered system, indicating that the system can make use of diverse mechanical sources and thus has potentially broad applications in illumination, display, entertainment, indication, surveillance and many others.

We report a single-electrode-based sliding-mode triboelectric nanogenerator (TENG) that not only can harvest mechanical energy but also is a self-powered displacement vector sensor system for touching pad technology. By utilizing the relative sliding between an electrodeless polytetrafluoroethylene (PTFE) patch with surface-etched nanoparticles and an Al electrode that is grounded, the fabricated TENG can produce an open-circuit voltage up to 1100 V, a short-circuit current density of 6 mA/m2, and a maximum power density of 350 mW/m2 on a load of 100 MΩ, which can be used to instantaneously drive 100 green-light-emitting diodes (LEDs). The working mechanism of the TENG is based on the charge transfer between the Al electrode and the ground by modulating the relative sliding distance between the tribo-charged PTFE patch and the Al plate. Grating of linear rows on the Al electrode enables the detection of the sliding speed of the PTFE patch along one direction. Moreover, we demonstrated that 16 Al electrode channels arranged along four directions were used to monitor the displacement (the direction and the location) of the PTFE patch at the center, where the output voltage signals in the 16 channels were recorded in real-time to form a mapping figure. The advantage of this design is that it only requires the bottom Al electrode to be grounded and the top PTFE patch needs no electrical contact, which is beneficial for energy harvesting in automobile rotation mode and touch pad applications.

A high-yield solution-processed ultrathin (<10 nm) trigonal tellurium (t-Te) nanowire (NW) is introduced as a new class of piezoelectric nanomaterial with a six-fold higher piezoelectric constant compared to conventional ZnO NWs for a high-volume power-density nanogenerator (NG). While determining the energy-harvesting principle in a NG consisting of t-Te NW, it is theoretically and experimentally found that t-Te NW is piezoelectrically activated only by creating strain in its radial direction, along which it has an asymmetric crystal structure. Based upon this mechanism, a NG with a monolayer consisting of well-aligned t-Te NWs and a power density of 9 mW/cm(3) is fabricated.

Developing sophisticated device architectures is of great significance to go beyond Moore's law with versatility toward human–machine interaction and artificial intelligence. Tribotronics/tribo-iontronics offer a direct way to controlling the transport properties of semiconductor devices by mechanical actions, which fundamentally relies on how to enhance the tribotronic gating effect through device engineering. Here, we propose a universal method to enhance the tribotronic properties through electric double layer (EDL) capacitive coupling. By preparing an ion gel layer on top of tribotronic graphene transistor, we demonstrate a dual-mode field effect transistor (i.e., a tribotronic transistor with capacitively coupled ion gel and an ion-gel-gated graphene transistor with a second tribotronic gate). The resulted tribotronic gating performances are greatly improved by twice for the on-state current and four times for the on/off ratio (the first mode). It can also be utilized as a multiparameter distance sensor with drain current increased by ∼600 μA and threshold voltage shifted by ∼0.8 V under a mechanical displacement of 0.25 mm (the second mode). The proposed methodology of EDL capacitive coupling offers a facile and efficient way to designing more sophisticated tribotronic devices with superior performance and multifunctional sensations.

Abstract Water-jet propulsions are widely used in high-performance ships. This study conducts numerical study on the unsteady flow of a complete water-jet propulsion. The internal flow field of the propulsion pump under the conditions of no installation of the shaft sleeve (and installation of the shaft sleeve. Spectrum analysis is used to compare the time-varying external characteristic and excitation characteristic under different conditions. Then, Dynamic Mode Decomposition technique is used to extract the high energy flow structures and corresponding frequencies. The results indicated that a large-scale vortex roll up above the driving shaft under the condition of rotational shaft, a pair of anti-rotation vortices appear behind the driving shaft under the condition of stationary shaft. These shaft induced vortices develop into unstable flow structures in the impeller region which moves relative to the impeller blades at rotational frequency. They further affect the unsteady flow in the guide vane region. The shedding vortices induced by the rotor-stator interaction are strengthened, while the passage vortices are weakened. Moreover, the dominant frequency of the passage vortex has decreased from 1.68 times the rotational frequency to 1.50 times the rotational frequency.

The forthcoming wearable health care devices garner considerable attention because of their potential for monitoring, treatment, and protection applications. Herein, a self-powered triboelectric patch was developed using polytetrafluoroethylene rubbed with nylon fabric. The triboelectric patch can maintain a stable electrostatic field, due to the excess electrification on the surface of the triboelectric layer. The designed triboelectric nanogenerator (TENG) output watt density can reach about 485 mW/m2 with added resistance of 11 kΩ. Additionally, the performance of the triboelectric patch allowed eye movement monitoring. The maximum voltage could reach 80 V at the vertical distance of 20 mm between the frictional layer and collector. The triboelectric patch not only can power a digital watch for potential wearable applications but also can be integrated to monitor eye movements during sleep. This work proposed a mechanism for human movement energy harvesting, which may be used for self-powered smart wearable health equipment and Maxwell displacement current wireless sensors.