Publications

The rapid growth of deformable and stretchable electronics calls for a deformable and stretchable power source. We report a scalable approach for energy harvesters and self-powered sensors that can be highly deformable and stretchable. With conductive liquid contained in a polymer cover, a shape-adaptive triboelectric nanogenerator (saTENG) unit can effectively harvest energy in various working modes. The saTENG can maintain its performance under a strain of as large as 300%. The saTENG is so flexible that it can be conformed to any three-dimensional and curvilinear surface. We demonstrate applications of the saTENG as a wearable power source and self-powered sensor to monitor biomechanical motion. A bracelet-like saTENG worn on the wrist can light up more than 80 light-emitting diodes. Owing to the highly scalable manufacturing process, the saTENG can be easily applied for large-area energy harvesting. In addition, the saTENG can be extended to extract energy from mechanical motion using flowing water as the electrode. This approach provides a new prospect for deformable and stretchable power sources, as well as self-powered sensors, and has potential applications in various areas such as robotics, biomechanics, physiology, kinesiology, and entertainment.

Abstract The utilization of unmanned aerial vehicles (UAVs) is on the rise across various industries. In such a scenario, the issue of flight safety for these UAVs becomes increasingly paramount. Currently, UAVs exhibit shortcomings in flight attitude perception compared to more mature manned aircraft, especially concerning the position sensing of flight actuation, which poses significant safety risks. Mature position monitoring solutions for flight actuation used in manned aircraft cannot be directly integrated into systems of UAV due to compatibility issues. This necessitates the development of new position sensing technologies to address this challenge. Triboelectric nanogenerators, with their advantages of miniaturization, self‐powering capabilities, and the ability to generate voltage‐level electrical signals, are chosen to form a part of the position detection system for sensors in UAVs. In this study, a self‐powered displacement sensor is developed that utilizes frictional charge separation signals. This sensor is specifically designed to monitor the position status of the flight actuators in UAV. With a compact volume of <11.1 cm 3 and a weight of <9.5 g, this sensor is lightweight efficient and adaptable for practical applications.

A nanogenerator (NG) usually gives a high output voltage but low output current, so that the output power is low. In this paper, we developed a general approach that gives a hugely improved instantaneous output power of the NG, while the entire output energy stays the same. Our design is based on an off–on–off contact based switching during mechanical triggering that largely reduces the duration of the charging/discharge process, so that the instantaneous output current pulse is hugely improved without sacrificing the output voltage. For a vertical contact-separation mode triboelectric NG (TENG), the instantaneous output current and power peak can reach as high as 0.53 A and 142 W at a load of 500 Ω, respectively. The corresponding instantaneous output current and power density peak even approach 1325 A/m2 and 3.6 × 105 W/m2, which are more than 2500 and 1100 times higher than the previous records of TENG, respectively. For the rotation disk based TENG in the lateral sliding mode, the instantaneous output current and power density of 104 A/m2 and 1.4 × 104 W/m2 have been demonstrated at a frequency of 106.7 Hz. The approach presented here applies to both a piezoelectric NG and a triboelectric NG, and it is a major advance toward practical applications of a NG as a high pulsed power source.

The importance of ocean exploration and underwater monitoring is becoming vital, due to the abundant biological, mineral, energy, and other resources in the ocean. Here, a self-powered underwater cable-based triboelectric nanogenerator (TENG) is demonstrated for underwater monitoring of mechanical motion/triggering, as well as searching and rescuing in the sea. Using a novel double-layer winding method combined with ferroelectric polarization, a self-powered cable-structured sensor with a stable electrical output has been manufactured, which can accurately respond to a variety of external mechanical stimuli. A self-powered cable sensing network woven using smart cables can comprehensively transmit information, such as the plane position and dive depth of a submersible. More precisely, it can analyze its direction of movement, speed, and path, along with transmitting information such as the submersible's size and momentum. The developed self-powered sensor based on the cable-based TENG not only has low cost and simple structure but also exhibits working accuracy and stability. Finally, the proposed work provides new ideas for future seabed exploration and ocean monitoring.

'Photoetching' published in 'Encyclopedia of Nanotechnology'

Biomedical electronic devices have enormous benefits for healthcare and quality of life. Still, the long-term working of those devices remains a great challenge due to the short life and large volume of conventional batteries. Since the nanogenerators (NGs) invention, they have been widely used to convert various ambient mechanical energy sources into electrical energy. The self-powered technology based on NGs is dedicated to harvesting ambient energy to supply electronic devices, which is an effective pathway to conquer the energy insufficiency of biomedical electronic devices. With the aid of this technology, it is expected to develop self-powered biomedical electronic devices with advanced features and distinctive functions. The goal of this review is to summarize the existing self-powered technologies based on NGs and then review the applications based on self-powered technologies in the biomedical field during their rapid development in recent years, including two main directions. The first is the NGs as independent sensors to converts biomechanical energy and heat energy into electrical signals to reflect health information. The second direction is to use the electrical energy produced by NGs to stimulate biological tissues or powering biomedical devices for achieving the purpose of medical application. Eventually, we have analyzed and discussed the remaining challenges and perspectives of the field. We believe that the self-powered technology based on NGs would advance the development of modern biomedical electronic devices.

Ferroelectric materials have drawn widespread attention due to their switchable spontaneous polarization and anomalous photovoltaic effect. The coupling between ferroelectricity and the piezo-phototronic effect may lead to the design of distinctive photoelectric devices with multifunctional features. Here, we report an enhancement of the photovoltaic performances in the ferroelectric p-type La-doped bismuth ferrite film (BLFO)/n-type zinc oxide (ZnO) nanowire array heterojunction by rationally coupling the strain-induced piezoelectricity in ZnO nanowires and the ferroelectricity in BLFO. Under a compressive strain of -2.3% and a 10 V upward poling of the BLFO, the open-circuit voltage (VOC) and short-circuit current density (JSC) of the device increase by 8.4% and 54.7%, respectively. Meanwhile, the rise (/decay) time is modulated from 153.7 (/108.8) to 61.28 (/74.86) ms. Systematical band diagram analysis reveals that the promotion of photogenerated carriers and boost of the photovoltaic performances of the device can be attributed to the modulated carrier transport behaviors at the BLFO/ZnO interface and the superposed driving forces arising from the adding up of the piezoelectric potential and ferroelectric polarization. In addition, COMSOL simulation results of piezopotential distribution in ZnO nanowire arrays and the energy band structure change of the heterojunction further confirm the mechanisms. This work not only presents an approach to design high-performance ferroelectric photovoltaic devices but also further broadens the research scope of piezo-phototronics.