A novel single-phase unidirectional power flow rectifier is proposed to achieve power factor correction and dc bus voltage regulation. Four active switches, two power diodes and two dc-side capacitors are used in the proposed circuit topology to generate a three-level PWM voltage waveform on the ac terminal of the proposed rectifier. To compare with NPC and capacitor-clamped topologies, no clamping diode or flying capacitor is used in the proposed rectifier. The reference line current is derived from the dc-tank voltage controller and a sine wave generator in phase with mains voltage. The carrier-based current controller is used in the inner loop to track the line current command. A neutral point voltage compensator is adopted in the control scheme such that the capacitor voltages on the dc side are balanced. The effectiveness of the proposed control algorithm is verified by the computer simulations and experimental results.
Discussion(0)
No comments yet. Be the first to comment.