Ultra-broadband 3-dB coupler based on dual-hollow-core polymer fiber covering E + S + C + L + U band

An ultra-broadband 3-dB coupler based on a polymer dual-hollow-core anti-resonant fiber (DHC-ARF) is designed to work in the E + S + C + L + U communication band. By incorporating two elliptical-like cores and modulating the air gap between the two cores, the wavelength and polarization dependence of the DHC-ARF-based coupler is reduced effectively. The feasibility of using a 1.46 cm long DHC-ARF as the ultra-broadband coupler for the operating bandwidth of 400 nm in the range between 1.33 µm and 1.73 µm is demonstrated theoretically. The coupling ratio of each polarized mode stabilizes at 50 ± 2% and the coupling ratio difference between the two polarized modes changes within ±0.6%. This DHC-ARF coupler which is made of a polymer can be fabricated by high-resolution 3D printing. Compared to a silica-based DHC-ARF coupler, the polymer-based DHC-ARF coupler is easier to manufacture and the total loss of the latter is only 0.041 ± 0.006 dB in the operating bandwidth. The polymer hollow-core fiber coupler boasting an ultra-broadband, short component length, and low loss is very promising in next-generation, high-speed, and large-capacity hollow-core fiber communication systems.