Study on Coupled Combustion Behavior of Two Parallel Line Fires

In this study, the interaction of two parallel line fires with a length-width ratio of greater than 50 was investigated and compared to a single line fire. Considering different length–width ratios and spacings between the fire sources, experiments were carried out to analyze the fire characteristics, such as the burning rate, the flame-merging state, the flame height, the flame tilt angle, and the flame length of the line fires. Its regularity was revealed by combining two mechanisms, namely, heat feedback enhancement and air entrainment restriction. The results revealed that the burning rate under different length–width ratios shows a uniform law, which increases first and then decreases with a greater spacing between the fire sources. There is a special relationship between the flame-merging probability Pm and the dimensionless characteristic parameters (S/ZC)/(L/d)0.27. Based on this relationship, a critical criterion of flame merging can be obtained as (S/ZC)/(L/d)0.27 = 2.38. In addition, the height and the length of the flame were studied to better describe the flame shape when the flame is tilted. Since the flame is bent, the flame length has an abrupt change at a specific position, and the inclination angle also has the same phenomenon. Finally, it was found that the influence of the length–width ratio on the line fires is relatively limited, which is further weakened under a greater length–width ratio.