Stabilizing Perovskite Solar Cells by Methyltriphenylphosphonium Iodide Studied with Maximum Power Point Tracking

The use of organic halide salts to passivate metal halide perovskite (MHP) surface defects has been studied extensively. Passivating the surface defects of the MHP is of critical importance for realizing highly efficient and stable perovskite solar cells (PSCs). Here, the successful application of a multifunctional organic salt, methyltriphenylphosphonium iodide (MTPPI), used as a passivation additive for grain boundary defects and as a molecular sealing layer in terms of stabilization, has been used to stabilize the mixed cation perovskite RbCsMAFA-PbIBr. To assess the passivating and stabilizing effects of MTPPI on RbCsMAFA-PbIBr PSCs, maximum power point tracking (MPPT) was applied as the most realistic and closest-to-application condition for the ageing test. Here, perovskite solar cells were aged under a light source yielding an excitation intensity corresponding to one sun with maximum power point tracking, which was interrupted periodically by current–voltage sweeps. This allowed for the extraction of all photovoltaic parameters necessary for a proper understanding of the ageing process. The MTPPI additive can donate iodine anions to halide vacancies and compensate a negative surface excess charge with cation interactions. On top of this, the large and bulky methyltriphenylphosphonium (MTPP+) cation may block both the escape of volatile perovskite components and the ingress of oxygen and water vapour. These collective roles of MTPPI have improved both the efficiency and stability of the solar cells compared to the reference without passivation additives.