Water heating applications consume a considerable portion of electricity demand in most of countries. Small wind turbines are one of attractive alternatives for grid electricity based water heating systems. Wind energy can be converted to heat energy in a high efficient manner. However it is essential that wind turbine based water heating systems should be economical and reliable. Maximum power point tracking algorithm of most of available wind turbines requires information from a wind speed sensor and a rotor speed sensor which reduces the reliability of the system. In this paper, the proposed 5 kW wind turbine does not require external wind speed sensors and rotor speed sensors. The system is consistent with sensorless maximum power point tracking algorithm, which eliminates the need for both wind speed and rotor speed sensors and gives a highly reliable solution for water heating applications. Internal voltage and current sensors are used to measure the output voltage, the output current and the power of the generator. Using those measurements, the sliding-mode observer can accurately estimate the rotor speed and position and which is used in the maximum power point tracking algorithm. To calculate the optimum rotor speed, the generator output power measurements are used with power signal feedback method. The effectiveness of the proposed system is verified using a simulation model by comparing the performances with a sensor based model.
Discussion(0)
No comments yet. Be the first to comment.