The selection of seismic motions is one of the most important issues for the time-history analysis of buildings. This paper discusses four different methods for obtaining spectrum-compatible acceleration time histories (i.e., accelerograms) of seismic motions. Based on these methods, four sets of accelerograms compatible with the design spectrum for Vancouver were selected for this study. These included (i) scaled real accelerograms, (ii) modified real accelerograms, (iii) simulated accelerograms, and (iv) artificial accelerograms. The selected sets were used as excitation motions in the nonlinear analysis of three reinforced concrete frame buildings designed for Vancouver. The buildings included a 4-storey, a 10-storey, and a 16-storey building, which can be considered representative of low-rise, medium-rise, and high-rise buildings, respectively. The storey shears, interstorey drifts, and curvature ductilities for beams and columns obtained from the analysis were used for the evaluation of the effects of the selected sets on the responses of the buildings. Based on the results from the analysis, scaled real accelerograms are recommended for use in time-history analysis of reinforced concrete frame buildings.
Discussion(0)
No comments yet. Be the first to comment.