Abstract A pilot polygeneration process of a 75 t h –1 circulating fluidized bed (CFB) boiler combined with a moving bed coal pyrolyzer was developed based on laboratory‐scale experimental results. The process operation showed good consistency and integration between boiler and pyrolyzer. Some critical operating parameters such as hot ash split flow from the CFB boiler to the pyrolyzer, mixing of hot ash and coal particles, control of pyrolysis temperature and solid inventory in the pyrolyzer, and pyrolysis gas clean‐up were investigated. Yields of 6.0 wt‐% tar and 8.0 wt‐% gas with a heating value of about 26 MJ m –3 at 600 °C were obtained. Particulate content in tar was restrained less than 4.0 wt‐% by using a granular filter of the moving bed. Operation results showed that this pilot polygeneration process was successfully scaled up.
Discussion(0)
No comments yet. Be the first to comment.