Online Sensor Information and Redundancy Resolution Based Obstacle Avoidance for High DOF Mobile Manipulator Teleoperation

Abstract High degrees of freedom (DOF) mobile manipulators provide more flexibility than conventional manipulators. They also provide manipulation operations with a mobility capacity and have potential in many applications. However, due to high redundancy, planning and control become more complicated and difficult, especially when obstacles occur. Most existing obstacle avoidance methods are based on off-line algorithms and most of them mainly focus on planning a new collision-free path, which is not appropriate for some applications, such as teleoperation and uses many system resources as well. Therefore, this paper presents an online planning and control method for obstacle avoidance in mobile manipulators using online sensor information and redundancy resolution. An obstacle contour reconstruction approach employing a mobile manipulator equipped with an active laser scanner system is also introduced in this paper. This method is implemented using a mobile manipulator with a seven-DOF manipulator and a four-wheel drive mobile base. The experimental results demonstrate the effectiveness of this method.