Lowering thermal gradients in Selective Laser melting by pre-heating the baseplate

Cracks and delamination, resulting from residual stresses are a barrier in the world of Additive Manufacturing and Selective Laser Melting (SLM) that prohibits the use of many metals in this field. By preheating the baseplate, thermal gradients are lowered and stresses can be reduced. In this work, some initial tests were performed with M2 Tool Steel. Results show that pre-heating enables the production of dense M2 parts. The influence of pre-heating on density and mechanical and physical properties is investigated. The paper shows many promising results for the production of SLM parts in materials that are very sensitive to crack formation and delamination. When using a pre-heating of 200°C, crackles parts were produced with a relative density of 99.8%.