In-Plane Assessment of Existing Timber Diaphragms in URM Buildings via Quasi-Static and Dynamic <i>In Situ</i> Tests

Mechanical and dynamic in-plane properties of timber diaphragms are known to be key parameters when determining both the local and global seismic response of unreinforced masonry (URM) buildings. However, few data pertaining to experimental campaigns on this issue are available in the literature, especially regarding existing floors. In this work, the outcomes of a field testing campaign on full-scale old timber diaphragms are presented. Two specimens, whose size was 5.6 x 9.6 m 2 and 4.7 x 9.6 m 2 were obtained from a 17 x 9.6 m 2 floor and were subjected to a series of both cyclic and snap back tests in the direction orthogonal to the joists. Since the original anchoring system was deficient, new epoxy-grouted anchors were installed before starting the testing procedure. So as to reproduce the inertial load distribution, an ad hoc loading system was developed by means of wire ropes and steel pulleys. After testing the diaphragms in the as-built condition, the effect of different refurbishment techniques was also investigated. From the results, it seems that even simple and cost-effective solutions such as the re-nailing of the flooring are sufficient to achieve a significant increase in the equivalent shear stiffness.