High temperature superconducting axial field magnetic coupler: realization and test

Contactless torque transmission through a large airgap is required in some industrial applications in which hermetic isolation is necessary.This torque transmission usually uses magnetic couplers, whose dimension strongly depends on the airgap flux density.The use of High Temperature Superconducting (HTS) coils to create a strong magnetic field may constitute a solution to reduce the size of the coupler.It is also possible to use this coupler to replace a torque tube in transmitting the torque produced by a HTS motor to its load.This paper presents the detailed construction and tests of an axial field HTS magnetic coupler.Pancake coils have been manufactured from BSCCO tape and used in one rotor of the coupler.The second rotor is mainly composed of NdFeB permanent magnets.Several tests have been carried out showing that the constructed coupler is working properly.A 3D finite element (FE) model of the studied coupler has been developed.Airgap magnetic field and torque measurements have been carried out and compared to the FE results.It has been shown that the measured and the computed quantities are in satisfactory agreement.