Heat generation during the fatigue of a cellular Al alloy

Afsaneh Rabiei; John W. Hutchinson; A.G. Evans

doi:10.1007/s11661-000-0108-0

Heat generation during the fatigue of a cellular Al alloy

Metallurgical and Materials Transactions A 31(4): 1129-1136

Article 2000 English

Abstract

1 min read

The heat generation from a notch during the compression-compression fatigue of a cellular Al alloy has been measured and compared with a model. The measure

Related publications

Article1999

Infrared Evaluation of Heat Generation During the Cyclic Deformation of a Cellular Al Alloy

Afsaneh Rabiei, John W. Hutchinson, A.G. Evans

MRS Proceedings

Article1987

Fatigue Crack Propagation in 2090 Aluminum-Lithium Alloy: Effect of Compression Overload Cycles

W. Yu, Robert O. Ritchie

Journal of Engineering Materials and Technology

Article2019

Nanoparticle additions promote outstanding fracture toughness and fatigue strength in a cast Al–Cu alloy

Chenglin Yang, Qinglong Zhao, Zhenjun Zhang, Linlin Li, Wei–Si Tian, Rui Liu, Peng Zhang, Yijiang Xu, Yanjun Li, Zhefeng Zhang, Qi‐Chuan Jiang, Robert O. Ritchie

Materials & Design

Article1985

On the growth of cracks at the fatigue threshold following compression overloads: Role of load ratio

P. Donehoo, W. Yu, Robert O. Ritchie

Materials Science and Engineering

Article2017

Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison

Mathew Speirs, Brecht Van Hooreweder, J. Van Humbeeck, Jean-pierre Kruth

Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials

Heat generation during the fatigue of a cellular Al alloy

Abstract

Discussion(0)

Related publications

Infrared Evaluation of Heat Generation During the Cyclic Deformation of a Cellular Al Alloy

Fatigue Crack Propagation in 2090 Aluminum-Lithium Alloy: Effect of Compression Overload Cycles

Nanoparticle additions promote outstanding fracture toughness and fatigue strength in a cast Al–Cu alloy

On the growth of cracks at the fatigue threshold following compression overloads: Role of load ratio

Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison