Experimental and numerical analyses of nitrogen oxides formation in a high ammonia-low hydrogen blend using a tangential swirl burner

Ammonia has been considered as a novel fuel for decarbonization purposes. However, emissions from combustion systems are still posing a problem. Therefore, experimental and numerical simulations have been conducted to study the concentration of exhaust emissions (Nitric oxide “NO”, Nitrous oxide “N 2 O”) from burning the ammonia/hydrogen (NH 3 /H 2 ) blend 85/15 (vol%). The effects were measured at various thermal powers ranging 10 to 20 kW and with different Reynolds numbers from 20,000—40,000. The experimental points were numerically investigated in the Ansys CHEMKIN-Pro environment employing seven chemical kinetic mechanisms taken from the literature. All experiments have been undertaken at standard atmospheric conditions. The experimental results showed that both NO and N 2 O gradually increased when the Reynolds number increased from 20,000 to 40,000. Along with that, the concentration of NO emissions at the exhaust reported minimum level when the Re = 20,000 due to lower reactivity radical formation, all that led to a deterioration of the flame characteristics. Also, the integrated radical intensities of NO*, OH*, NH*, and NH 2 * demonstrate an increasing trend as Re increased from 20,000 to 40,000. In terms of thermal power, N 2 O suffered an abrupt decrease when the thermal power increased up to 15 kW, while the opposite occurs for NO. In addition, the radicals intensity of OH*, NH*and NH 2 * figures show an increase in their concentration when the thermal power increased up to 15 kW then decreased with increasing thermal intensity to reach 20 kW, reflecting into increased NO productions and decreased N 2 O levels. The numerical analysis showed that Stagni, Bertolino, and Bowen Mei were the most accurate mechanisms as these give a good prediction for NO and N 2 O. The study also showed that the chemical reaction (HNO + O 2 ↔ NO + HO 2 ) is the main source of NO formation. While the chemical reaction (NH + NO ↔ N 2 O + H) is responsible for the formation of N 2 O by consuming NO and when there will be abundance in NH radicals. Finally, dealing with a blended fuel of high ammonia concentration encourages ammonia chemistry to become more dominant in the flame. It decreases the flame temperature, hence lowering heat loss between the flame and the surrounding.