DEVELOPMENT OF A MODULAR SYSTEM FOR DRILLING AID FOR THE INSTALLATION OF DENTAL IMPLANTS

In oral implantology, proper execution of the holes for the installation of dental implants is directly related to the correct functioning and durability of the system itself. For this reason, the procedure discussed here, which was once performed freehand in all its phases, is now being implemented through aids with more precision. Masks currently in use are created in resin ad hoc; surgical stents are inserted into the holes that will then be used as a guide. These aids are fixed into the jaw by means of micro bone screws in order to prevent movement during surgery. Despite this, we still use the guides as they are, centered properly with the help of drilling jigs. The same technique is also used in partially edentulous cases through smaller jig fixed on teeth near to the implant zone. In this article, we propose a guidance system for milling cutters used in partially edentulous cases involving from one to three adjacent installations. The purpose of the study was to realize a modular model adaptable to most dental implants, as well as efficient, quick, and low cost by pouring the resin into a plaster mold of the teeth, and then drilling the masks into position in the plants at the required angle.