Development, Characterization and Electromechanical Actuation Behavior of Ionic Polymer Metal Composite Actuator based on Sulfonated Poly(1,4-phenylene ether-ether-sulfone)/Carbon Nanotubes

This paper presents the development of new cost-effective hybrid-type sulfonated poly(1,4-phenylene ether-ether-sulfone) (SPEES) and functionalized single-walled carbon nanotubes (SWNT) based actuators produced by the film-casting method followed by chemical reduction of Pt ions as electrodes. The preparation of SPEES was investigated in details and sulfonation of polymer was characterized by ion exchange capacity (IEC), Fourier-transform infrared (FTIR) and degree of sulfonation measurements. SPEES having degree of sulfonation of 126% was blended with SWNT and used to fabricate IPMC actuator. The chemical composition and detailed structure of SPEES-SWNT ionic polymer membranes were confirmed by FTIR, EDX and transmittance electron microscopy (TEM) analysis. Scanning electron microscopy (SEM) micrographs revealed the homogeneously distributed layers of Pt electrodes on the surfaces of IPMC membrane. The electrochemical and electromechanical properties of SPEES-SWNT-Pt-based IPMC actuator shows a better actuation performance than conventional IPMC actuators in terms of higher IEC, Proton conductivity, higher current density, electrochemical impedance spectroscopy (EIS), and large bending deflection. The robust, flexible and mechanically strong membranes prepared by the synergistic combination of SPEES and SWNT may have considerable potential as actuator materials for robotic and biomimetic applications.