Contributions of adhesion and hysteresis to coefficient of friction between shoe and floor surfaces: effects of floor roughness and sliding speed

Improving shoe–floor friction in order to reduce slip and fall accidents requires thorough understanding of the factors that contribute to friction. The friction between a sliding viscoelastic material (shoe) and a hard surface (floor) has two major components: adhesion and hysteresis. This study aimed to quantify the effects of floor roughness and sliding speed on adhesion and hysteresis to determine how each component contributes to the coefficient of friction. Experiments were conducted on a pin on disc tribometer using ceramic tiles with three levels of roughness, six sliding speeds, two common shoe materials and four liquid lubricants. Hysteresis was measured using a lubricant that minimised adhesion. Dry and lubricated adhesion was measured by subtracting hysteresis from the coefficient of friction. Analysis of variance regression models were used to determine the contributions of hysteresis, dry adhesion, sliding speed and fluid to lubricated coefficient of friction. Increased floor roughness led to increased hysteresis, while increased sliding speed reduced both adhesion and hysteresis. These findings are consistent with theory that states that larger asperities increase hysteretic deformation and that sliding speed affects deformation and real area of contact between a viscoelastic material and a hard surface. The model correctly predicted 83% of variation in coefficient of friction based on dry adhesion, hysteresis and fluid dependent constants. The sensitivity of hysteresis friction to shoe material and floor roughness indicates that optimising these parameters may be effective at reducing slip accidents on oily floor surfaces.