Braid-reinforced PVDF hollow fiber membranes for high-efficiency separation of oily waste water

Several efforts to produce mechanically robust polymeric hollow fiber membranes have led to the use of polyethylene terephthalate (PET) hollow braided tubes, which offer rigidity to hollow fiber membranes. However, a compensation of flux exists with increased filtration pathway occasioned by braid substrate and thick polymer coating. It is often difficult to control the fabrication parameters to achieve uniformly coated and thin separation layer. In this work, we report a modification of the erstwhile dry-jet wet spinning process for braided hollow fiber by introducing a loop-system to increase resident time in the coagulation bath for effective solvent exchange and leaching of pore former additive. A combination of air gap (5, 15 and 25 cm), polymer concentration (15%, 17% and 19%) and take-up speed (1.2, 2.4 and 3.6 m/min) were varied to produce membranes with optimum filtration performance against crude oil emulsion feed. BRP-HM8 spun with 15 wt% PVDF, 15 cm air gap and take-up speed of 2 rpm exhibited thin and uniform coating outside of braid, well-developed pore structure resulting in high flux up to 620 L/m2h, good hydrophilic/oleophobic characteristics with > 98% rejection of crude oil as well high mechanical properties against harsh feed and elevated pressure.