Analysis of the Mechanical Performance of Sleeve Considering the Different Distributions of Grouting Defects

To study the influence of grouting defects on the mechanical properties of grouting sleeves, 49 groups of specimens with different specifications were made considering the length and location of defects, monotonic axial tension tests were carried out to study the influence of grouting defects on its failure process, failure mode, load-displacement curve, bearing capacity and other mechanical properties, and the influence law of different distribution defects on the grouting sleeve was analyzed. This research shows that there are two forms of sleeve failure: steel bar fracture failure and steel bar pullout failure. The bearing capacity of specimens with a defect length of 2D and 3D varies with the defect type. The ultimate displacement of specimens with a defect length of 2D varies with the defect type. The ultimate displacement of specimens with a defect length of 3D increases with the increase in bearing capacity. By moving defects, it is found that if there is a vertical overlap of defects in the upper or middle part of the specimen, the bearing capacity of the specimen will be greatly affected.