Analysis and implementation of an active snubber dc/dc converter with series–parallel connection in primary and secondary sides

An active snubber dc/dc converter to achieve zero voltage switching (ZVS) on power switch is presented. In the proposed converter, the primary windings of two transformers are connected in series so that the primary currents of the two transformers are equal. The secondary sides of the isolated zeta converters are connected in the parallel to share the load current and reduce the current stresses on the secondary windings of the two transformers. A boost type of active snubber is connected in parallel with the main switch to recycle the energy stored in transformer leakage and magnetizing inductors and to limit voltage stress of the main switch. During the transition interval between the active switch and the auxiliary switch, the resonance based on the resonant inductor and the output capacitor of the power switch will allow the switch to turn on at ZVS. The principle of operation, steady-state analysis and design consideration of the proposed converter are provided. Finally, experimental results for a 360 W (12 V/30 A) prototype circuit with 150 kHz switching frequency were given to demonstrate the circuit performance and verify the feasibility of the proposed converter.