A soft switching interleaved forward converter with current doubler rectifier is presented. Active clamp circuit is used in the primary winding of transformers to recycle the energy stored in the leakage inductor and the magnetising inductor so that the voltage stresses of switches are reduced. The leakage inductance of transformers, the magnetising inductance and the clamp capacitance are resonant to achieve zero-voltage switching (ZVS) of clamp switches. The resonance between the leakage inductance of transformers and output capacitance of switch will achieve ZVS operation for the main switches in the proposed converter. The interleaved operation can reduce the current ripple on the output capacitor. Two current doubler rectifiers with ripple current cancellation are connected in parallel at the output side to reduce the current stress of the secondary winding of the transformer. All these features make the proposed converter suitable for the DC–DC converter with high output current. The operation principle and system analysis of the proposed converter are provided in detail. Finally, experimental results, taken from a laboratory prototype rated at 125 W, are presented to verify the feasibility of the proposed converter.
Discussion(0)
No comments yet. Be the first to comment.