A New Soft-Switched High Step-Up Trans-Inverse DC/DC Converter Based on Built-In Transformer

This article proposes a new Zero-Voltage Switching (ZVS) high step-up DC/DC converter based on a built-in transformer for renewable energy applications. The proposed topology utilizes a Three-Winding Built-In Transformer (TWBT) to increase the voltage gain, but unlike most coupled-inductor-based DC-DC converters, high output voltages can be obtained under a lower magnetic turns ratio. In this circuit, with the help of a regenerative active clamp circuit, the energy of the leakage inductor from the TWBT is absorbed and transferred to the output, therefore, the ZVS conditions at turn-on time are achieved for switches. The voltage stresses across the switches of the proposed topology are limited, and the diodes reverse-recovery issue are eliminated. Due to the low input current ripple, the suggested topology can be used for renewable energy sources. Furthermore, because of the low number of components along with the soft-switching operation, the proposed circuit can offer enough high efficiency. The operational principle, steady-state analysis, and characteristics of the proposed converter are provided. Finally, a 200 W prototype with 25 V input and 400 V output voltage is built to validate the analytical results.