A Hybrid Device for Enhancing Flotation of Fine Particles by Combining Micro-Bubbles with Conventional Bubbles

Flotation in the mining industry is a very significant separation technique. It is known that fine and ultra-fine particles are difficult to float, leading to losses of valuable minerals, mainly due to their low collision efficiency with bubbles. Flotation of fine particles can be enhanced either by increasing the apparent particle size or by decreasing the bubble size. Literature review reveals that electroflotation resulted in higher recoveries of ultrafine particles as compared with dispersed-air flotation, because electrolytic bubbles are smaller in size. To this end, the best practical approach is to combine conventional air bubbles and micro-bubbles from water electrolysis. Therefore, the design, fabrication, and operation of a bench-scale micro-bubble generator through water electrolysis is proposed. Moreover, this electrolysis unit is adapted in a mechanical Denver-type flotation cell. The resulting hybrid flotation device is capable of producing bubbles within a wide range of diameters. The significance of this process is that micro-bubbles, attached tothe surface of fine particles, facilitate the attachment of conventional-sized bubbles and subsequently increase the flotation recovery of particles. Experimental flotation results so far on the hybrid device indicate the enhancement of fine particle recovery by approximately 10% with the addition of micro-bubbles.