Publications

This work presents a microfabricated liquid-sample chamber for real-time TEM (Transmission Electron Microscopy) of nanoscale processes driven by liquid evaporation. Previous liquid-microchambers for TEM hold liquid samples in fully-closed (vacuum-tight) micro/nano-scale structures, thus evaporation-driven nanoscale phenomena couldn't be studied. The present work uses intended leakage/failure in bonding and e-beam induced heating in order to generate solvent-drying during TEM imaging, and the captured real-time nanometer-scale movies visualize critical steps in the self-assembly process of 2D nanoparticle arrays including the two-step crystallization process.

Janus particles reveal transient propulsion forces with a median of 4.5-6.2 pN lasting on average 21-41 ms and reaching up to 20 pN under optical confinement. Simulations incorporating these transient forces reproduce the observed trajectories, confirming their role in driving active motion. Functionalization with long DNA polymers further enhances directional motion by reducing rotational diffusion. These results establish a single-particle framework for quantifying active forces in photocatalytic Janus particles and offer design principles for light-powered micromotors.

The effect of temperature on the rate of hole transfer from photoexcited quantum dots (QDs) is investigated by measuring the driving force dependence of the charge transfer rate for different sized QDs across a range of temperatures from 78 to 300 K. Spherical CdSe/CdS core/shell QDs were used with a series of ferrocene-derived molecular hole acceptors with an 800 meV range in electrochemical potential. Time-resolved photoluminescence measurements and photoluminescence quantum yield measurements in an integrating sphere were both performed from 78 to 300 K to obtain temperature-dependent rates for a series of driving forces as dictated by the nature of the molecular acceptor. For both QD sizes studied and all ligands, the Arrhenius plot of hole transfer exhibited an activated (linear) regime at higher temperatures and a temperature-independent regime at low temperatures. The extracted activation energies in the high-temperature regime were consistent across all ligands for a given QD size. This observation is not consistent with direct charge transfer from the QD valence band to the ferrocene acceptor. Instead, a model in which charge transfer is mediated by a shallow and reversible trap more accurately fits the experimental results. Implications for this observed trap-mediated transfer are discussed including as a strategy to more efficiently extract charge from QDs.

Flat perovskite crystals Bulk crystals and thick films of inorganic-organic perovskite materials such as CH 3 NH 3 PbI 3 have shown promise as active material for solar cells. Dou et al. show that thin films—a single unit cell or a few unit cells thick—of a related composition, (C 4 H 9 NH 3 ) 2 PbBr 4 , form squares with edges several micrometers long. These materials exhibit strong and tunable blue photoluminescence. Science , this issue p. 1518

We demonstrate the transition from isolated to collective optical modes in plasmonic oligomers. Specifically, we investigate the resonant behavior of planar plasmonic hexamers and heptamers with gradually decreasing the interparticle gap separation. A pronounced Fano resonance is observed in the plasmonic heptamer for separations smaller than 60 nm. The spectral characteristics change drastically upon removal of the central nanoparticle. Our work paves the road toward complex hierarchical plasmonic oligmers with tailored optical properties.

Watching it all fall apart The control of the shape and size of metal nanoparticles can be very sensitive to the growth conditions of the particles. Ye et al. studied the reverse process: They tracked the dissolution of gold nanoparticles in a redox environment inside a liquid cell within an electron microscope, controlling the particle dissolution with the electron beam. Tracking short-lived particle shapes revealed structures of greater or lesser stability. The findings suggest kinetic routes to particle sizes and shapes that would otherwise be difficult to generate. Science , this issue p. 874

Anisotropic colloidal quasi-two-dimensional nanoplates (NPLs) hold great promise as functional materials due to their combination of low dimensional optoelectronic properties and versatility through colloidal synthesis. Recently, lead-halide perovskites have emerged as important optoelectronic materials with excellent efficiencies in photovoltaic and light-emitting applications. Here we report the synthesis of quantum confined all inorganic cesium lead halide nanoplates in the perovskite crystal structure that are also highly luminescent (PLQY 84%). The controllable self-assembly of nanoplates either into stacked columnar phases or crystallographic-oriented thin-sheet structures is demonstrated. The broad accessible emission range, high native quantum yields, and ease of self-assembly make perovskite NPLs an ideal platform for fundamental optoelectronic studies and the investigation of future devices.

Size- and shape-controlled nanocrystal growth is intensely researched for applications including electro-optic, catalytic, and medical devices. Chemical transformations such as cation exchange overcome the limitation of traditional colloidal synthesis, where the nanocrystal shape often reflects the inherent symmetry of the underlying lattice. Here we show that nanocrystals, with established synthetic protocols for high monodispersity, can be templates for independent composition control. Specifically, controlled interconversion between wurtzite CdS, chalcocite Cu2S, and rock salt PbS occurs while preserving the anisotropic dimensions unique to the as-synthesized materials. Sequential exchange reactions between the three sulfide compositions are driven by the disparate solubilites of the metal ion exchange pair in specific coordinating molecules. Starting with CdS, highly anisotropic PbS nanorods are created, which serve as an important material for studying strong 2-dimensional quantum confinement, as well as for optoelectronic applications. Furthermore, interesting nanoheterostructures of CdS|PbS are obtained by precise control over ion insertion and removal.

Because of their favorable physical and photochemical properties, colloidal CdSe/ZnS-semiconductor nanocrystals (commonly known as quantum dots) have enormous potential for use in biological imaging. In this report, we present an assay that uses quantum dots as markers to quantify cell motility. Cells that are seeded onto a homogeneous layer of quantum dots engulf and absorb the nanocrystals and, as a consequence, leave behind a fluorescence-free trail. By subsequently determining the ratio of cell area to fluorescence-free track area, we show that it is possible to differentiate between invasive and noninvasive cancer cells. Because this assay uses simple fluorescence detection, requires no significant data processing, and can be used in live-cell studies, it has the potential to be a powerful new tool for discriminating between invasive and noninvasive cancer cell lines or for studying cell signaling events involved in migration.

We demonstrate antenna-enhanced hydrogen sensing at the single-particle level. We place a single palladium nanoparticle near the tip region of a gold nanoantenna and detect the changing optical properties of the system upon hydrogen exposure.

Author(s): Savnik, Barry; Krupnick, Jim; Tudor, David; Harkins, Joe; Alivisatos, Paul; Chemla, Daniel; Alper, Mark; Bertozzi, Carolyn; Bokor, Jeff; Frechet, Jean; Louie, Steve; Salmeron, Miquel

Advances in automation and data analytics can aid exploration of the complex chemistry of nanoparticles. Lead halide perovskite colloidal nanocrystals provide an interesting proving ground: there are reports of many different phases and transformations, which has made it hard to form a coherent conceptual framework for their controlled formation through traditional methods. In this work, we systematically explore the portion of Cs-Pb-Br synthesis space in which many optically distinguishable species are formed using high-throughput robotic synthesis to understand their formation reactions. We deploy an automated method that allows us to determine the relative amount of absorbance that can be attributed to each species in order to create maps of the synthetic space. These in turn facilitate improved understanding of the interplay between kinetic and thermodynamic factors that underlie which combination of species are likely to be prevalent under a given set of conditions. Based on these maps, we test potential transformation routes between perovskite nanocrystals of different shapes and phases. We find that shape is determined kinetically, but many reactions between different phases show equilibrium behavior. We demonstrate a dynamic equilibrium between complexes, monolayers, and nanocrystals of lead bromide, with substantial impact on the reaction outcomes. This allows us to construct a chemical reaction network that qualitatively explains our results as well as previous reports and can serve as a guide for those seeking to prepare a particular composition and shape.