Intelligent reflecting surface (IRS) is deemed as a promising solution to improve the spectral and energy efficiency of wireless communications cost-effectively. In this paper, we consider a wireless network where multiple base stations (BSs) serve their respective users with the aid of distributed IRSs in the downlink communication. Specifically, each IRS assists in the transmission from its associated BS to user via passive beamforming, while in the meantime, it also randomly scatters the signals from other co-channel BSs, thus resulting in additional signal as well as interference paths in the network. As such, a new IRS-user/BS association problem arises pertaining to optimally balance the passive beamforming gains from all IRSs among different BS-user communication links. To address this new problem, we first derive a tractable lower bound of the average signal-to-interference-plus-noise ratio (SINR) at the receiver of each user, termed average-signal-to-average-interference-plus-noise ratio (ASAINR), based on which two ASAINR balancing problems are formulated to maximize the minimum ASAINR among all users by optimizing the IRS-user associations without and with BS transmit power control, respectively. We also characterize the scaling behavior of user ASAINRs with the increasing number of IRS reflecting elements to investigate the different effects of IRS-reflected signal versus interference power. Moreover, to solve the two ASAINR balancing problems that are both non-convex optimization problems, we propose an optimal solution to the problem without BS power control and low-complexity suboptimal solutions to both problems by applying the branch-and-bound method and exploiting new properties of the IRS-user associations, respectively. Numerical results verify our performance analysis and also demonstrate significant performance gains of the proposed solutions over benchmark schemes.
Radio-frequency (RF) enabled wireless energy transfer (WET), as a promising solution to provide cost-effective and reliable power supplies for energy-constrained wireless networks, has drawn growing interests recently. To overcome the significant propagation loss over distance, employing multi-antennas at the energy transmitter (ET) to more efficiently direct wireless energy to desired energy receivers (ERs), termed \emph{energy beamforming}, is an essential technique for enabling WET. However, the achievable gain of energy beamforming crucially depends on the available channel state information (CSI) at the ET, which needs to be acquired practically. In this paper, we study the design of an efficient channel acquisition method for a point-to-point multiple-input multiple-output (MIMO) WET system by exploiting the channel reciprocity, i.e., the ET estimates the CSI via dedicated reverse-link training from the ER. Considering the limited energy availability at the ER, the training strategy should be carefully designed so that the channel can be estimated with sufficient accuracy, and yet without consuming excessive energy at the ER. To this end, we propose to maximize the \emph{net} harvested energy at the ER, which is the average harvested energy offset by that used for channel training. An optimization problem is formulated for the training design over MIMO Rician fading channels, including the subset of ER antennas to be trained, as well as the training time and power allocated. Closed-form solutions are obtained for some special scenarios, based on which useful insights are drawn on when training should be employed to improve the net transferred energy in MIMO WET systems.
To achieve the full passive beamforming gains of intelligent reflecting surface (IRS), accurate channel state information (CSI) is indispensable but practically challenging to acquire, due to the excessive amount of channel parameters to be estimated which increases with the number of IRS reflecting elements as well as that of IRS-served users. To tackle this challenge, we propose in this paper two efficient channel estimation schemes for different channel setups in an IRS-assisted multi-user broadband communication system employing the orthogonal frequency division multiple access (OFDMA). The first channel estimation scheme, which estimates the CSI of all users in parallel simultaneously at the access point (AP), is applicable for arbitrary frequency-selective fading channels. In contrast, the second channel estimation scheme, which exploits a key property that all users share the same (common) IRS-AP channel to enhance the training efficiency and support more users, is proposed for the typical scenario with line-of-sight (LoS) dominant user-IRS channels. For the two proposed channel estimation schemes, we further optimize their corresponding training designs (including pilot tone allocations for all users and IRS time-varying reflection pattern) to minimize the channel estimation error. Moreover, we derive and compare the fundamental limits on the minimum training overhead and the maximum number of supportable users of these two schemes. Simulation results verify the effectiveness of the proposed channel estimation schemes and training designs, and show their significant performance improvement over various benchmark schemes.
Scavenging energy from ambient radio signals, namely wireless energy harvesting (WEH), has recently drawn significant attention. In this paper, we consider a point-to-point wireless link over the flat-fading channel, where the receiver replenishes energy via WEH from the signals sent by the transmitter. We consider a SISO (single-input single-output) system where the single-antenna receiver cannot decode information and harvest energy independently from the same signal received. Under this practical constraint, we propose a dynamic power splitting (DPS) scheme, where the received signal is split into two streams with adjustable power levels for information decoding and energy harvesting separately based on the instantaneous channel condition that is assumed to be known at the receiver. We derive the optimal power splitting rule at the receiver to achieve various trade-offs between the maximum ergodic capacity for information transfer and the maximum average harvested energy for power transfer. Moreover, for the case when the channel state information is also known at the transmitter, we investigate the joint optimization of transmitter power control and receiver power splitting. Finally, we extend the result for DPS to the SIMO (single-input multiple-output) system and investigate a low-complexity power splitting scheme termed antenna switching.
Millimeter wave (mm-wave) communication using lens antenna arrays is a promising technique for realizing cost-effective large multiple-input multiple-output (MIMO) systems with only limited radio frequency chains. This paper studies a multi-user mm-wave single-sided lens MIMO system, where the base station (BS) is equipped with a full-dimensional lens antenna array and each mobile station employs the conventional antenna arrays. By exploiting the angle-dependent energy focusing property of lens antenna array and the multi-path sparsity of mm-wave channels, we propose a low-complexity single-carrier (SC)-based path-division multiple access (PDMA) scheme for the general wide-band frequency-selective channels. To this end, a new technique called path delay compensation is proposed at the BS to transform the multi-user frequency-selective MIMO channels to parallel frequency-flat small-size MIMO channels. In addition, we propose an efficient channel estimation scheme tailored for the SC-based PDMA, which requires negligible training overhead in practical mm-wave systems and yet leads to comparable performance as that with perfect channel state information. Numerical results show that the proposed design achieves comparable performance as the state-of-the-art benchmark systems in terms of spectrum efficiency, but with significantly reduced hardware/power consumption cost and signal processing complexity.
Intelligent reflecting surface (IRS) is a promising technology to improve the performance of backscatter communication systems by smartly reconfiguring the multi-reflection channel. To fully exploit the passive beamforming gain of IRS in backscatter communication, channel state information (CSI) is indispensable but more practically challenging to acquire than conventional IRS-assisted systems, since IRS passively reflects signals over both the forward and backward (backscattering) links between the reader and tag. To address this issue, we propose in this letter a new and efficient channel estimation scheme for the IRS-assisted backscatter communication system. To minimize the mean-square error (MSE) of channel estimation, we formulate and solve an optimization problem by designing the IRS training reflection matrix for channel estimation under the constraints of unit-modulus elements and full rank. Simulation results verify the effectiveness of the proposed channel estimation scheme as compared to other baseline schemes.
Six-dimensional movable antenna (6DMA) is an innovative and transformative technology to improve wireless network capacity by adjusting the 3D positions and 3D rotations of antennas/surfaces (sub-arrays) based on the channel spatial distribution. For optimization of the antenna positions and rotations, the acquisition of statistical channel state information (CSI) is essential for 6DMA systems. In this paper, we unveil for the first time a new \textbf{\textit{directional sparsity}} property of the 6DMA channels between the base station (BS) and the distributed users, where each user has significant channel gains only with a (small) subset of 6DMA position-rotation pairs, which can receive direct/reflected signals from the user. By exploiting this property, a covariance-based algorithm is proposed for estimating the statistical CSI in terms of the average channel power at a small number of 6DMA positions and rotations. Based on such limited channel power estimation, the average channel powers for all possible 6DMA positions and rotations in the BS movement region are reconstructed by further estimating the multi-path average power and direction-of-arrival (DOA) vectors of all users. Simulation results show that the proposed directional sparsity-based algorithm can achieve higher channel power estimation accuracy than existing benchmark schemes, while requiring a lower pilot overhead.
The newly emerging wireless powered communication networks (WPCNs) have recently drawn significant attention, where radio signals are used to power wireless terminals for information transmission. In this paper, we study a WPCN where one multi-antenna access point (AP) coordinates energy transfer and information transfer to/from a set of single-antenna users. A harvest-then-transmit protocol is assumed where the AP first broadcasts wireless power to all users via energy beamforming in the downlink (DL), and then, the users send their independent information to the AP simultaneously in the uplink (UL) using their harvested energy. To optimize the users' throughput and yet guarantee their rate fairness, we maximize the minimum throughput among all users by a joint design of the DL-UL time allocation, the DL energy beamforming, and the UL transmit power allocation, as well as receive beamforming. We solve this nonconvex problem optimally by two steps. First, we fix the DL-UL time allocation and obtain the optimal DL energy beamforming, UL power allocation, and receive beamforming to maximize the minimum signal-to-interference-plus-noise ratio of all users. This problem is shown to be still nonconvex; however, we convert it equivalently to a spectral radius minimization problem, which can be solved efficiently by applying the alternating optimization based on the nonnegative matrix theory. Then, the optimal time allocation is found by a one-dimensional search to maximize the minimum rate of all users. Furthermore, two suboptimal designs of lower complexity are also proposed, and their throughput performance is compared against that of the optimal solution.
The reliable operation of microgrids is hindered by the integration of intermittent renewable energy generations. To overcome this problem, in this paper we study the realtime energy management for two cooperative microgrids with integrated renewable energy generators. We first assume that renewable energy generations and loads of microgrids can be perfectly predicted or are known a priori. In this case, we solve the off-line optimization problem and propose a distributed algorithm for the optimal off-line energy management solution. Next, by defining energy cost saving as the total energy cost reduction with proposed microgrid energy cooperation over the traditional case of no cooperation, we investigate how the distance-dependent renewable energy generation correlation between the two microgrids affects the energy cost saving. Inspired by the observed energy cost saving versus distance behavior, we further propose two online algorithms of low complexity for the real-time energy management of cooperative microgrids. Last, we evaluate the performances of our proposed algorithms via simulations based on the Tucson power system data.
This paper studies unmanned aerial vehicle (UAV) enabled wireless communication, where a rotarywing UAV is dispatched to send/collect data to/from multiple ground nodes (GNs). We aim to minimize the total UAV energy consumption, including both propulsion energy and communication related energy, while satisfying the communication throughput requirement of each GN. To this end, we first derive an analytical propulsion power consumption model for rotary-wing UAVs, and then formulate the energy minimization problem by jointly optimizing the UAV trajectory and communication time allocation among GNs, as well as the total mission completion time. The problem is difficult to be optimally solved, as it is non-convex and involves infinitely many variables over time. To tackle this problem, we first consider the simple fly-hover-communicate design, where the UAV successively visits a set of hovering locations and communicates with one corresponding GN when hovering at each location. For this design, we propose an efficient algorithm to optimize the hovering locations and durations, as well as the flying trajectory connecting these hovering locations, by leveraging the travelling salesman problem (TSP) and convex optimization techniques. Next, we consider the general case where the UAV communicates also when flying. We propose a new path discretization method to transform the original problem into a discretized equivalent with a finite number of optimization variables, for which we obtain a locally optimal solution by applying the successive convex approximation (SCA) technique. Numerical results show the significant performance gains of the proposed designs over benchmark schemes, in achieving energy-efficient communication with rotary-wing UAVs.
This paper studies interference alignment (IA) based multi-cell cooperative resource allocation for the downlink OFDMA with universal frequency reuse. Unlike the traditional scheme that treats subcarriers as separate dimensions for resource allocation, the IA technique is utilized to enable frequency-domain precoding over parallel subcarriers. In this paper, the joint optimization of frequency-domain precoding via IA, subcarrier user selection and power allocation is investigated for a cooperative three-cell OFDMA system to maximize the downlink throughput. Numerical results for a simplified symmetric channel setup reveal that the IA-based scheme achieves notable throughput gains over the traditional scheme only when the inter-cell interference link has a comparable strength as the direct link, and the receiver SNR is sufficiently large. Motivated by this observation, a practical hybrid scheme is proposed for cellular systems with heterogenous channel conditions, where the total spectrum is divided into two subbands, over which the IAbased scheme and the traditional scheme are applied for resource allocation to users located in the cell-intersection region and cellnon- intersection region, respectively. It is shown that this hybrid resource allocation scheme flexibly exploits the downlink IA gains for OFDMA-based cellular systems.
This letter studies the rate maximization problem for a cognitive (secondary) radio link communicating over the same frequency band as of a primary radio link, where both the primary and the secondary radios are equipped with multiple antennas. In contrast to the conventional interference power constraint approach to protect the primary receiver, we consider a new design paradigm for rate maximization of the secondary user (SU) under a direct constraint on the minimum primary user (PU) transmission rate subject to the SU interference. This problem is shown to be non-convex due to the newly introduced PU rate constraint. However, by approximating this rate constraint by the method of Taylor series expansion, this letter proposes an iterative algorithm to maximize the SU rate while satisfying the PU's minimum data rate requirement. The proposed scheme with the PU rate constraint is shown to outperform the conventional scheme with the interference power constraint in terms of SU's achievable rates for different target PU rates.
This paper studies the design of decentralized multiuser (MU) multi-antenna/multiple-input-multiple-output (MIMO) systems for wireless spectrum sharing over a fixed frequency band, in which users independently update their transmit covariance matrices for individual transmit-rate maximization in an iterative manner. This design problem was usually investigated in the literature by assuming that each user treats the co-channel interference from all the other users as additional noise at the receiver and, accordingly, the conventional single-user decoder (SUD) is applied. This paper considers a more advanced decoder design approach for decentralized MU-MIMO systems, in which each user opportunistically cancels the co-channel interference from certain subset of coexisting users when their signals are jointly decodable with the desired signal at the receiver. The new decoding scheme is thus termed opportunistic multiuser detection (OMD). This paper derives the optimal transmit covariance matrix for users' iterative maximization of individual transmit rates with the proposed OMD at the receiver, and evaluates the achievable throughput gains for decentralized MU-MIMO systems against the conventional SUD. Promising applications of the OMD for achieving maximum interference mitigation gains in spectrum sharing based wireless systems such as cognitive radio networks and cellular networks are demonstrated.
In this paper, we propose a novel polarforming antenna (PA) to achieve cost-effective wireless sensing and communication. Specifically, the PA can enable polarforming to adaptively control the antenna's polarization electrically as well as tune its position/rotation mechanically, so as to effectively exploit polarization and spatial diversity to reconfigure wireless channels for improving sensing and communication performance. We study an PA-enhanced integrated sensing and communication (ISAC) system that utilizes user location sensing to facilitate communication between an PA-equipped base station (BS) and PA-equipped users. First, we model the PA channel in terms of transceiver antenna polarforming vectors and antenna positions/rotations. We then propose a two-timescale ISAC protocol, where in the slow timescale, user localization is first performed, followed by the optimization of the BS antennas' positions and rotations based on the sensed user locations; subsequently, in the fast timescale, transceiver polarforming is adapted to cater to the instantaneous channel state information (CSI), with the optimized BS antennas' positions and rotations. We propose a new polarforming-based user localization method that uses a structured time-domain pattern of pilot-polarforming vectors to extract the common stable components in the PA channel across different polarizations based on the parallel factor (PARAFAC) tensor model. Moreover, we maximize the achievable average sum-rate of users by jointly optimizing the fast-timescale transceiver polarforming, including phase shifts and amplitude variations, along with the slow-timescale antenna rotations and positions at the BS. Simulation results validate the effectiveness of polarforming-based localization algorithm and demonstrate the performance advantages of polarforming, antenna placement, and their joint design.
Radio waves carry both energy and information simultaneously. Nevertheless, radio-frequency (RF) transmissions of these quantities have traditionally been treated separately. Currently, the community is experiencing a paradigm shift in wireless network design, namely, unifying wireless transmission of information and power so as to make the best use of the RF spectrum and radiation as well as the network infrastructure for the dual purpose of communicating and energizing. In this paper, we review and discuss recent progress in laying the foundations of the envisioned dual purpose networks by establishing a signal theory and design for wireless information and power transmission (WIPT) and identifying the fundamental tradeoff between conveying information and power wirelessly. We start with an overview of WIPT challenges and technologies, namely, simultaneous WIPT (SWIPT), wirelessly powered communication networks (WPCNs), and wirelessly powered backscatter communication (WPBC). We then characterize energy harvesters and show how WIPT signal and system designs crucially revolve around the underlying energy harvester model. To that end, we highlight three different energy harvester models, namely, one linear model and two nonlinear models, and show how WIPT designs differ for each of them in single-user and multi-user deployments. Topics discussed include rate-energy region characterization, transmitter and receiver architectures, waveform design, modulation, beamforming and input distribution optimizations, resource allocation, and RF spectrum use. We discuss and check the validity of the different energy harvester models and the resulting signal theory and design based on circuit simulations, prototyping, and experimentation. We also point out numerous directions that are promising for future research.
