Robustness to packet loss is a critical requirement for video communication over packet switched networks. Intra-coding is an important tool to mitigate the effects of packet loss by limiting error propagation. This work proposes an algorithm for intra/inter coding mode selection, while utilizing the feedback channel that carries acknowledgement information about received packets. The overall distortion in frame reconstruction at the decoder due to quantization, error concealment (after packet loss) and error propagation is estimated at pixel-level precision, and is dynamically refined based on the feedback information. The estimate is then integrated into a rate-distortion (RD) framework for optimal selection of coding mode for each macroblock. Simulation results demonstrate that precise distortion estimation enables the coder to achieve substantial and consistent gain in PSNR over known state-of-the-art feedback-based mode selection modes.
Lightning activity causes the different lightning impacts to transmission lines varying with the time and region,accordingly,the lightning protection performance has a great difference in time and space.In order to completely master the lightning protection performance of transmission lines,we presented an evaluation method which takes the time-space-difference lightning protection performance of transmission lines into account especially.On the basis of the long-term lightning data detected by lightning location system,we adopted the grid statistical method of lightning parameters to carry out the lightning parameter analysis along the transmission line corridor in the appointed time period.With the obtained lightning parameters including ground flash density and cumulative probability distribution of lightning current,the lightning trip-out rate of transmission line as well as each line section were calculated in the appointed time period.Compared with the evaluation grade determined from the designed value,defined value or operating value of the lightning trip-out rate of the line,the time-space-difference of lightning protection performance of the transmission line was evaluated with detailed grades.The evaluation results can be used in taking more appropriate and selective lightning protection measures to improve the lightning protection performance of transmission lines.
This letter proposes a novel wave-transparent and decoupling antenna in broadband dual-Polarized dual-Band shared-aperture array. It is implemented by kneading the double-arrow-stripe-shaped decoupling structure into the frequency-selective metasurface structure of the lower-frequency-band (LFB) antenna arms. The LFB antenna radiator can be considered as frequency-selective and array-decoupling metasurface for the higher-frequency-band (HFB) antennas placed below. The antenna system consists of 2 × 2 HFB (3.3-3.6 GHz)arrays and an LFB (1.65-2.58 GHz) antenna with wave-transparent and decoupled structure (WTDS). Then, without adding additional structure, the in-band isolations of co- and cross-polarized between HFB antennas are promoted to >25.6 dB and >25 dB only by relying on the antenna form of the LFB antenna itself.
Radio waves carry both energy and information simultaneously. Nevertheless, Radio-Frequency (RF) transmission of these quantities have traditionally been treated separately. Currently, we are experiencing a paradigm shift in wireless network design, namely unifying wireless transmission of information and power so as to make the best use of the RF spectrum and radiations as well as the network infrastructure for the dual purpose of communicating and energizing. In this paper, we review and discuss recent progress on laying the foundations of the envisioned dual purpose networks by establishing a signal theory and design for Wireless Information and Power Transmission (WIPT) and identifying the fundamental tradeoff between conveying information and power wirelessly. We start with an overview of WIPT challenges and technologies, namely Simultaneous Wireless Information and Power Transfer (SWIPT),Wirelessly Powered Communication Network (WPCN), and Wirelessly Powered Backscatter Communication (WPBC). We then characterize energy harvesters and show how WIPT signal and system designs crucially revolve around the underlying energy harvester model. To that end, we highlight three different energy harvester models, namely one linear model and two nonlinear models, and show how WIPT designs differ for each of them in single-user and multi-user deployments. Topics discussed include rate-energy region characterization, transmitter and receiver architecture, waveform design, modulation, beamforming and input distribution optimizations, resource allocation, and RF spectrum use. We discuss and check the validity of the different energy harvester models and the resulting signal theory and design based on circuit simulations, prototyping and experimentation. We also point out numerous directions that are promising for future research.
In this paper, we consider an unmanned aerial vehicle (UAV) enabled relaying system where multiple UAVs are deployed as aerial relays to support simultaneous communications from a set of source nodes to their destination nodes on the ground. An optimization problem is formulated under practical channel models to maximize the minimum achievable expected rate among all pairs of ground nodes by jointly designing UAVs' three-dimensional (3D) placement as well as the bandwidth-and-power allocation. This problem, however, is non-convex and thus difficult to solve. As such, we propose a new method, called iterative Gibbs-sampling and block- coordinate-descent (IGS-BCD), to efficiently obtain a high-quality suboptimal solution by synergizing the advantages of both the deterministic (BCD) and stochastic (GS) optimization methods. Specifically, our proposed method alternates between two optimization phases until convergence is reached, namely, one phase that uses the BCD method to find locally-optimal UAVs' 3D placement and the other phase that leverages the GS method to generate new UAVs' 3D placement for exploration. Moreover, we present an efficient method for properly initializing UAVs' placement that leads to faster convergence of the proposed IGS-BCD algorithm. Numerical results show that the proposed IGS-BCD and initialization methods outperform the conventional BCD or GS method alone in terms of convergence-and-performance trade-off, as well as other benchmark schemes.
This paper studies optimal resource allocation in the wireless-powered communication network (WPCN), where one hybrid access point (H-AP) operating in full duplex (FD) broadcasts wireless energy to a set of distributed users in the downlink (DL) and, at the same time, receives independent information from the users via time-division multiple access in the uplink (UL). We design an efficient protocol to support simultaneous wireless energy transfer (WET) in the DL and wireless information transmission (WIT) in the UL for the proposed FD-WPCN. We jointly optimize the time allocations to the H-AP for DL WET and different users for UL WIT and the transmit power allocations over time at the H-AP to maximize the users' weighted sum rate of UL information transmission with harvested energy. We consider both the cases with perfect and imperfect self-interference cancellation (SIC) at the H-AP, for which we obtain optimal and suboptimal time and power allocation solutions, respectively. Furthermore, we consider the half-duplex (HD) WPCN as a baseline scheme and derive its optimal resource allocation solution. Simulation results show that the FD-WPCN outperforms the HD-WPCN when effective SIC can be implemented and more stringent peak power constraint is applied at the H-AP.
We consider in this paper a new intelligent reflecting surface (IRS)-aided LEO satellite communication system, by utilizing the controllable phase shifts of massive passive reflecting elements to achieve flexible beamforming, which copes with the time-varying channel between the high-mobility satellite (SAT) and ground node (GN) cost-effectively. In particular, we propose a new architecture for IRS-aided LEO satellite communication where IRSs are deployed at both sides of the SAT and GN, and study their cooperative passive beamforming (CPB) design over line-of-sight (LoS)-dominant single-reflection and double-reflection channels. Specifically, we jointly optimize the active transmit/receive beamforming at the SAT/GN as well as the CPB at two-sided IRSs to maximize the overall channel gain from the SAT to each GN. Interestingly, we show that under LoS channel conditions, the high-dimensional SAT-GN channel can be decomposed into the outer product of two low-dimensional vectors. By exploiting the decomposed SAT-GN channel, we decouple the original beamforming optimization problem into two simpler subproblems corresponding to the SAT and GN sides, respectively, which are both solved in closed-form. Furthermore, we propose an efficient transmission protocol to conduct channel estimation and beam tracking, which only requires independent processing of the SAT and GN in a distributed manner, thus substantially reducing the implementation complexity. Simulation results validate the performance advantages of the proposed IRS-aided LEO satellite communication system with two-sided cooperative IRSs, as compared to various baseline schemes such as the conventional reflect-array and one-sided IRS.
Intelligent reflecting surface (IRS) is envisioned to be a new and revolutionizing technology for achieving spectrum and energy efficient wireless communication networks cost-effectively in the future. Specifically, an IRS consists of a large number of low-cost passive elements each reflecting the incident signal with a certain phase shift to collaboratively achieve beamforming and/or interference suppression at designated receivers. In this paper, we study an IRS-aided multiuser multiple-input single-output (MISO) wireless system where one IRS is deployed to assist in the communication from a multi-antenna access point (AP) to multiple single-antenna users. As such, each user receives the superposed signals from the AP as well as the IRS via its reflection. We aim to minimize the total transmit power at the AP by jointly optimizing the transmit beamforming by active antenna array at the AP and reflect beamforming by passive phase shifters at the IRS, subject to users' individual signal-to-interference-plus-noise ratio (SINR) constraints. However, the formulated problem is non-convex and difficult to be solved optimally.
Mobile-edge computation offloading (MECO) is an emerging technology for enhancing mobiles' computation capabilities and prolonging their battery lives, by offloading intensive computation from mobiles to nearby servers such as base stations. In this paper, we study the energy-efficient resource-management policy for the asynchronous MECO system, where the mobiles have heterogeneous input-data arrival time instants and computation deadlines. First, we consider the general case with arbitrary arrival-deadline orders. Based on the monomial energy-consumption model for data transmission, an optimization problem is formulated to minimize the total mobile-energy consumption under the time-sharing and computation-deadline constraints. The optimal resource-management policy for data partitioning (for offloading and local computing) and time division (for transmissions) is shown to be computed by using the block coordinate decent method. To gain further insights, we study the optimal resource-management design for two special cases. First, consider the case of identical arrival-deadline orders, i.e., a mobile with input data arriving earlier also needs to complete computation earlier. The optimization problem is reduced to two sequential problems corresponding to the optimal scheduling order and joint data-partitioning and time-division given the optimal order. It is found that the optimal time-division policy tends to balance the defined effective computing power among offloading mobiles via time sharing. Furthermore, this solution approach is extended to the case of reverse arrival-deadline orders. The corresponding time-division policy is derived by a proposed transformation-and-scheduling approach, which first determines the total offloading duration and data size for each mobile in the transformation phase and then specifies the offloading intervals for each mobile in the scheduling phase.
Intelligent reflecting surface (IRS) is envisioned to play a significant role in future wireless communication systems thanks to its powerful capability of enabling smart and reconfigurable radio environment. In this paper, we study the multi-IRS aided downlink communication in a massive multiple-input multiple-output (MIMO) system, where a multi-antenna BS simultaneously serves multiple remote single-antenna users with orthogonal beams reflected by multiple IRSs. By exploiting the line-of-sight (LoS) link between each pair of selected IRSs, a multi-hop cascaded LoS link can be established between the BS and each user via their cooperative beam routing. Under this setup, we optimize the selected IRSs and their beam routing path for each user, along with the BS/IRS active/passive beamforming such that the minimum received signal power among all users is maximized, subject to a new multi-beam routing path separation constraint for avoiding the inter-user/route interference. To tackle this problem, we first derive the optimal BS/IRS active/passive beamforming in closed-form for any given beam routes and show the beam routing optimization is NP-complete by recasting it as an equivalent graph-optimization problem. To solve this challenging problem, we then propose an efficient recursive algorithm to partially enumerate the feasible solutions, which effectively balances the performance-complexity trade-off by tuning its design parameter. Numerical results demonstrate that the proposed algorithm can achieve near-optimal performance with low enumeration complexity and also outperform other benchmark schemes.
We consider an amplify-and-forward scheme for two-way relaying over OFDM, in which two nodes wish to exchange information via a relay. Assuming full channel knowledge, we perform power allocation for the relay and both information-exchanging nodes, as well as tone permutation at the relay, so as to maximize the sum capacity. A dual decomposition technique is employed for power allocation, while a greedy approach is proposed for tone permutation. In particular, we explore an interesting water-filling behavior displayed by this power allocation solution. Numerical results demonstrate that substantial capacity gains are achieved by implementing the two proposed solutions, either individually or successively.
In this letter, we study efficient channel estimation for an intelligent reflecting surface (IRS)-assisted orthogonal frequency division multiplexing (OFDM) system to achieve minimum training time. First, a fast channel estimation scheme with reduced OFDM symbol duration is proposed for arbitrary frequency-selective fading channels. Next, under the typical condition that the IRS-user channel is line-of-sight (LoS) dominant, another fast channel estimation scheme based on the novel concept of sampling-wise IRS reflection variation is proposed. Moreover, the pilot signal and IRS training reflection pattern are jointly optimized for both proposed schemes. Finally, the proposed schemes are compared in terms of training time and channel estimation performance via simulations, as well as against benchmark schemes.
No abstract is provided for this article.
This paper studies optimal resource allocation in the wireless-powered communication network (WPCN), where one hybrid access-point (H-AP) operating in full-duplex (FD) broadcasts wireless energy to a set of distributed users in the downlink (DL) and at the same time receives independent information from the users via time-division-multiple-access (TDMA) in the uplink (UL). We design an efficient protocol to support simultaneous wireless energy transfer (WET) in the DL and wireless information transmission (WIT) in the UL for the proposed FD-WPCN. We jointly optimize the time allocations to the H-AP for DL WET and different users for UL WIT as well as the transmit power allocations over time at the H-AP to maximize the users' weighted sum-rate of UL information transmission with harvested energy. We consider both the cases with perfect and imperfect self-interference cancellation (SIC) at the H-AP, for which we obtain optimal and suboptimal time and power allocation solutions, respectively. Furthermore, we consider the half-duplex (HD) WPCN as a baseline scheme and derive its optimal resource allocation solution. Simulation results show that the FD-WPCN outperforms HD-WPCN when effective SIC can be implemented and more stringent peak power constraint is applied at the H-AP.
In this letter, we consider a double-active-intelligent reflecting surface (IRS) aided wireless communication system, where two active IRSs are properly deployed to assist the communication from a base station (BS) to multiple users located in a given zone via the double-reflection links. Under the assumption of fixed per-element amplification power for each active-IRS element, we formulate a rate maximization problem subject to practical constraints on the reflection design, elements allocation, and placement of active IRSs. To solve this non-convex problem, we first obtain the optimal active-IRS reflections and BS beamforming, based on which we then jointly optimize the active-IRS elements allocation and placement by using the alternating optimization (AO) method. Moreover, we show that given the fixed per-element amplification power, the received signal-to-noise ratio (SNR) at the user increases asymptotically with the square of the number of reflecting elements; while given the fixed number of reflecting elements, the SNR does not increase with the per-element amplification power when it is asymptotically large. Last, numerical results are presented to validate the effectiveness of the proposed AO-based algorithm and compare the rate performance of the considered double-active-IRS aided wireless system with various benchmark systems.
