Publications

This work was financially supported by project POCI-01-0145-FEDER-007457 – (CONSTRUCT - Institute of R&D in Structures and Construction) and by project POCI-01-0145-FEDER-007633 (ISISE) funded by FEDER funds through COMPETE2020 - Programa Operacional Competitividade e Internacionalizacao (POCI) – and by national funds through FCT - Fundacao para a Ciencia e a Tecnologia. FCT and FEDER (COMPETE2020) are acknowledged for the funding of the research project PTDC/ECM-EST/1056/2014 (POCI-01-0145-FEDER-016841). The first author also thanks the individual grant with reference number of SFRH/BPD/114754/2016 funded by FCT.

This study aims to provide a better understanding of the autogenous shrinkage of slag and fly ash-based alkali-activated materials (AAMs) cured at ambient temperature. The main reaction products in AAMs pastes are C-A-S-H type gel and the reaction rate decreases when slag is partially replaced by fly ash. Due to the chemical shrinkage and the fine pore structure of AAMs pastes, drastic drop of internal relative humidity is observed and large pore pressure is generated. The pore pressure induces not only elastic deformation but also a large creep of the paste. Besides the pore pressure, other driving forces, like the reduction of steric-hydration force due to the consumption of ions, also cause a certain amount of shrinkage, especially in the acceleration period. Based on the mechanisms revealed, a computational model is proposed to estimate the autogenous shrinkage of AAMs. The calculated autogenous shrinkage matches well with the measured results.

The interface between filler and hydration products can have a significant effect on the mechanical properties of the cement paste system. With different adhesion properties between filler and hydration products, the effect of microstructural features (size, shape, surface roughness), particle distribution and area fraction of filler on the fracture behavior of a blended cement paste system is supposed to be different, as well. In order to understand the effect of the microstructural features, particle distribution and area fraction of filler on the fracture behavior of a blended cement paste system with either strong or weak filler-matrix interface, microscale simulations with a lattice model are carried out. The results show that the strength of the filler-matrix interface plays a more important role than the microstructural features, particle distribution and area fraction of filler in the crack propagation and the strength of blended cement paste. The knowledge acquired here provides a clue, or direction, for improving the performance of existing fillers. To improve the performance of fillers in cement paste in terms of strength, priority should be given to improving the bond strength between filler particles and matrix, not to modifying the microstructural features (i.e., shape and surface roughness) of the filler.

Alkali activated slag (AAS) has shown promising potential to replace ordinary Portland cement as a binder material. Synthesized from industrial by-products, AAS can show high strength, thermal resistance and good durability. However, AAS has been reported to exhibit high autogenous shrinkage. Autogenous shrinkage is a critical issue for building materials since it can induce micro- or macro-cracking when the materials are under restrained conditions. Hence, this work aims at mitigating the autogenous shrinkage of AAS by means of internal curing. The influences of internal curing on microstructure formation and autogenous shrinkage are investigated. The results show that internal curing provided by superabsorbent polymers is a promising way to reduce the autogenous shrinkage of AAS.