146 publications from this institution
The semi-circular bend (SCB) specimen is widely used to measure fracture toughness of brittle materials such as rock. In this work, the stress field, fracture process zone (FPZ), and crack propagation velocity of SCB specimen are analyzed during the fracture process of rock specimens. The FPZ of specimen is obtained by experimental and numerical methods under a three-point bend test. The stress concentration zones of specimen present a heart shape at peak load points. FPZ forms before macro fracture occurs. The macro fracture form inside FPZ in a post-peak region of a load–displacement curve. The crack propagation process of specimen include two stages, namely the rapid crack initial development stage, and the final crack splitting stage. The maximum crack propagation velocity of specimen is about 267 m/s, and the average crack propagation velocity is about 111 m/s.
The stability and safety of the vertical shaft during construction is an important problem for deep mining engineering because of the high in situ stresses. This paper conducts experimental studies on the difficulty of shaft support during the construction of No. 6 deep shaft at the Huize Mine, Yunnan Province, China. Based on the rule of similarity test, a similar material formula was developed, and standard model samples of the vertical shaft were prepared. Three different support methods were set up, including steel fiber-reinforced concrete support, drilling pressure relief support, and slot filling support. The experiments were conducted by using a true triaxial test system, and the testing process was monitored by a static stress–strain gauge and an acoustic emission system. The experimental results show that the integrity of the borehole pressure relief support shaft is optimal under the in situ stress. As the maximum principal stress increases to the instability and failure of the shaft, the peak load, cumulative number, and energy of acoustic emission events were the highest using the steel fiber concrete support method, and the peak load was the lowest using the borehole pressure relief. The borehole pressure relief transfers the stress around the shaft to the deep part. Although it ensures the integrity of the shaft, it causes internal damage to the shaft, reduces the energy storage of the shaft, and results in the lowest cumulative number and energy of acoustic emission events. After the instability and failure of the shaft, the average block size of the shaft debris is the highest under the borehole pressure relief support along the direction of the maximum principal stress. On the other hand, the mechanical properties of samples with different support methods under dynamic load conditions are studied by applying external low-frequency disturbances, and the test conclusions have been verified through numerical simulation. Field tests have verified that the steel fiber-reinforced concrete lining support can maintain the integrity of the deep shaft wall and ensure safety during mining production.
