Publications

Abstract Fire disaster is one of the most common hazards that threaten public safety and social development: how to improve the fire escape and rescue capacity remains a huge challenge. Here, a 3D honeycomb‐structured woven fabric triboelectric nanogenerator (F‐TENG) based on a flame‐retardant wrapping yarn is developed. The wrapping yarn is fabricated through a continuous hollow spindle fancy twister technology, which is compatible with traditional textile production processes. The resulting 3D F‐TENG can be used in smart carpets as a self‐powered escape and rescue system that can precisely locate the survivor position and point out the escape route to timely assist victim search and rescuing. As interior decoration, the unique design of the honeycomb weaving structure endows the F‐TENG fabric with an excellent noise‐reduction ability. In addition, combining with its good machine washability, air permeability, flame‐retardency, durability, and repeatability features, the 3D F‐TENG may have great potential applications in fire rescue and wearable sensors as well as smart home decoration.

Abstract In the field of bionics, sophisticated and multifunctional electronic skins with a mechanosensing function that are inspired by nature are developed. Here, an energy‐harvesting electronic skin (energy‐E‐skin), i.e., a pressure sensor with energy‐harvesting functions is demonstrated, based on fingerprint‐inspired conducting hierarchical wrinkles. The conducting hierarchical wrinkles, fabricated via 2D stretching and subsequent Ar plasma treatment, are composed of polydimethylsiloxane (PDMS) wrinkles as the primary microstructure and embedded Ag nanowires (AgNWs) as the secondary nanostructure. The structure and resistance of the conducting hierarchical wrinkles are deterministically controlled by varying the stretching direction, Ar plasma power, and treatment time. This hierarchical‐wrinkle‐based conductor successfully harvests mechanical energy via contact electrification and electrostatic induction and also realizes self‐powered pressure sensing. The energy‐E‐skin delivers an average output power of 3.5 mW with an open‐circuit voltage of 300 V and a short‐circuit current of 35 µA; this power is sufficient to drive commercial light‐emitting diodes and portable electronic devices. The hierarchical‐wrinkle‐based conductor is also utilized as a self‐powered tactile pressure sensor with a sensitivity of 1.187 mV Pa ‐1 in both contact‐separation mode and the single‐electrode mode. The proposed energy‐E‐skin has great potential for use as a next‐generation multifunctional artificial skin, self‐powered human–machine interface, wearable thin‐film power source, and so on.

Among all-solid-state batteries, rechargeable Al-ion batteries have attracted most attention because they involve three-electron-redox reactions with high theoretic specific capacity. However, the solid Al-ion conductor electrolytes are less studied. Here, the microscopic path of Al3+-ion conduction of NASICON-type (Al0.2Zr0.8)20/19Nb(PO4)3 oxide is identified by temperature-dependent neutron powder diffraction and aberration-corrected scanning transmission electron microscopy experiments. (Al0.2Zr0.8)20/19Nb(PO4)3 shows a rhombohedral structure consisting of a framework of (Zr,Nb)O6 octahedra sharing corners with (PO4) tetrahedra; the Al occupy trigonal antiprisms exhibiting extremely large displacement factors. This suggests a strong displacement of Al ions along the c axis of the unit cell as they diffuse across the structure by a vacancy mechanism. Negative thermal expansion behavior is also identified along a and b axes, due to folding of the framework as temperature increases.

Mechanical motion sensing and monitoring is an important component in the field of industrial automation. Rotary motion is one of the most basic forms of mechanical motion, so it is of great significance for the development of the entire industry to realize rotary motion state monitoring. In this paper, a triboelectric rotary motion sensor (TRMS) with variable amplitude differential hybrid electrodes is proposed, and an integrated monitoring system (IMS) is designed to realize real-time monitoring of industrial-grade rotary motion state. First, the operating principle and monitoring characteristics are studied. The experiment results indicate that the TRMS can achieve rotation speed measurement in the range of 10–1000 rpm with good linearity, and the error rate of rotation speed is less than 0.8%. Besides, the TRMS has an angle monitoring range of 360° and its resolution is 1.5° in bidirectional rotation. Finally, the applications of the designed TRMS and IMS prove the feasibility of self-powered rotary motion monitoring. This work further promotes the development of triboelectric sensors (TESs) in industrial application.

Abstract Here, a smart microfluidic system that can realize both long distance transport of micro‐/nanodroplets and precise patterning of microfluidics is designed based on triboelectric nanogenerator (TENG) and a photocontrollable adhesion surface (PCAS). The high output voltage from TENG can eject a microdroplet to a maximum distance of 640 mm (a maximum distance/diameter ratio of 300), while TENG can also manipulate the microdroplet under a thick dielectric layer (2 mm). Meanwhile, water adhesion as well as contact angle of the PCAS changes significantly with a short period of UV treatment and thus it can help to capture the moving microfluidics at the designated position. Moreover, microfluidic patterning with a variety of patterns and arrays on this PCAS can be obtained by using UV imprinting and the combination of TENG and PCAS can achieve an effective self‐powered microfluidic patterning system. Finally, a tunable gripper probe for 3D transport of microdroplets is demonstrated as another application of TENG and PCAS. These smart microfluidic systems based on TENG and PCAS have excellent applicability for many fields, such as drug/cell delivery, controllable chemical reaction for liquid testing, and production of microdroplets.

Vertically aligned single-crystal ZnO nanorods have been successfully fabricated on semiconducting GaN, Al0.5Ga0.5N, and AlN substrates through a vapor-liquid-solid process. Near-perfect alignment was observed for all substrates without lateral growth. Room-temperature photoluminescence measurements revealed a strong luminescence peak at approximately 378 nm. This work demonstrates the possibility of growing heterojunction arrays of ZnO nanorods on AlxGa1-xN, which has a tunable band gap from 3.44 to 6.20 eV by changing the Al composition from 0 to 1, and opens a new channel for building vertically aligned heterojunction device arrays with tunable optical properties and the realization of a new class of nanoheterojunction devices.

For versatile mechanical energy harvesting from arbitrary moving objects such as humans, a new mode of triboelectric nanogenerator is developed based on the sliding of a freestanding triboelectric-layer between two stationary electrodes on the same plane. With two electrodes alternatively approached by the tribo-charges on the sliding layer, electricity is effectively generated due to electrostatic induction. A unique feature of this nanogenerator is that it can operate in non-contact sliding mode, which greatly increases the lifetime and the efficiency of such devices. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Mechanochemistry revolutionizes traditional reactions through mechanical stimulation, but its reaction efficiency is limited. Recent advancements in utilizing triboelectric charge from liquid-solid contact electrification (CE) have demonstrated significant potential in improving the reaction efficiency. However, its efficacy remains constrained by interfacial electrical double-layer screening in aqueous solutions. This study pioneered chemistry in nonaqueous systems via CE for catalysis and luminescence. Density functional theory simulations and experiments revealed varying electron transfer capabilities and chemoselectivity of CE across different solvents. Phenol degradation via CE in dimethyl sulfoxide (DMSO) exhibited a rate over 40 times faster than that of traditional mechano-driven chemistry. A more intuitive comparison revealed that CE degradation of phenol in DMSO exhibits a 30-fold rate improvement compared to deionized water, where the degradation remains incomplete. Luminol oxidation by radicals generated solely via CE in DMSO eliminates the dependence on traditional catalysts and side reactions, establishing a pure and simple system for investigating the reaction mechanisms. A high and stable luminescence characteristic was maintained for 3 months, enhancing the imaging accuracy and stability exponentially. This study underscores the impact of triboelectric charge on reaction efficiency and chemoselectivity, establishing a new paradigm in nonmetal catalysis, mechanoluminescence, and providing profound insights into reaction kinetics.